Protective/Armor

Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside

The Hack Kids Lower Body Protective shorts protect at all important vital impact zones. Designed as underwear, the shorts are fitted tight and include an antibacterial, 3D, ergonomically-formed chamois. - NockOut absorbent padding - Antibacterial, vented, and ergonomically 3D formed chamois - Youth sizing

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - CE Directive 89/686/EEC MTB

TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection

Specifically designed with the growing Enduro scene in mind, the Indy Leg combines the unrestricted mobility of the Race Face Charge Leg with the additional impact protection of the T5 Evo. Second-skin Butterfly Mesh sleeve with targeted D30 high performance shock absorbing protective foam knee. Protection you can trust on rowdy descents built into a minimal sleeve for unlimited range of motion while climbing. - Lycra and butterfly mesh sleeve offers second skin fit - Targeted D30 high performance shock absorbing impact foam knee coverage - Woven elastic top strap with Velcro closure for personalized adjustment - Silicone gripper along inner top opening ensures "stay-put" fit - Silicone patch at shin eliminates slippage

You can't wear bulky, uncomfortable pads that hold you back. But when the elements turn against you, it could put you on the sideline, and you can't let that happen. With Pro-X3 Elbow Pads, you have the protection you need, when you need it. The rest of the time, you won't even know it's there. Go ride! - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.

Bluegrass Skinny elbow pads are the perfect choice for those having fun on trails. The Bluegrass pads have an extended sleeve to add a little extra stability to the fit, and to prevent having to pull them back into place mid-ride. - Two-layer protection - Extended sleeve - Silicone grippers - Elastic band - Breathable fabric - Certification CE 1621-1:2012 Level 1

- Custom diecut removable D3O XTI Mesh foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability.

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ Kids Elbow Guard, iXS introduces product properties like exchangeable padding and next-generation, structurally improved AeroMesh. offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Youth sizing

The Flex Shorts offer protection on the hips, coccyx and thighs. Areas prone to injury or re-injury can now be protected with a compression fit short that flexes to the body's shape in all types of riding. - Flexible curve 1mm flexible side panels for a contoured fit and polygon perforated foam pads on the hips and legs - Rear yolk designed to protect the coccyx - All pads are removable for washing - Double layer polygon foam for increased ventilation and airflow - Jaquard knit elastic waistband and compression fit - Designed beyond CE EN 1621/1 Standards

Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012. - Rollable and stash-able using the elastic loop - Durable knee cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long thigh-length fit for no slippage and all-day comfort - Silicone top and bottom cuff elastic gripper - Silicone logo print to assist in gripping short liner cuff - Certified CE en1621-1:2012 level 1 - Weight 205G pair (size XL)

Features D3O high performance foam and an open-back construction so no shoe removal is necessary. • D3O high performance shock absorbing foam on the front and foam padded sidewalls for additional coverage • Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort • Integrated stabilization pad centers the knee and ensures a secure fit • Branded rubber grab tabs and RF moniker logo • Open back construction; no shoe removal necessary

Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

The Carve EVO+ guards are light and extremely comfortable to wear. These guards are ideal for more demanding use due to the integrated Xmatter padding that allows for high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, and structurally tough AeroMesh that offers a high level of comfort and structural strength. - Xmatter protection foam (exchangeable) - Low friction impact shells to absorb and distribute impact - AeroMesh light, moisture wicking, breathable, anti-bacterial - LoopLock closures - Silicone stopper - EN1621-1:2012 certified

Lightweight and breathable enough to forget you're wearing them, the Slayer Bike Elbow Sleeves offer low-profile padding for hot days and all-mountain rides. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match your arm. Snug-fitting four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable elbow pad - Perforated DK Impact energy-absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

- Removable D3O T4 Trio foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability. - Unisex size range

- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 Compact certified impact absorbing foam. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability.

TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection

TERATEC Plus Protection is designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

Features D3O high performance shock absorbing foam and a terry lining for wicking and comfort. - D3O high performance shock absorbing foam is flexible in it's natural state but will protect upon impact - Integrated stabilization pad centers the elbow and ensures a secure fit - Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort - Soft mesh panel at inner elbow for venting - Woven upper elastic strap and lower Neoprene comfort strap - Branded rubber grab tab and RF moniker logo

The Race Face Covert Knee Pad is a highly breathable knee guard that features the ultra low profile, CE-certified D3O Ghost pad. All the protection, none of the bulk. - D3O Ghost knee pad - Mesh body with lycra rear gusset - Woven elastic with gripper sewn into rear gusset - Ripstop knee cover - Silicone grippers top and bottom - Removable pad

- Removable D30 high-performance shock absorbing protective foam at hips - Butterfly mesh throughout ensures a second skin fit to keep targeted hip protection in place - Highly durable mesh panels at inner thigh ensure maximum venting - Custom heat-moulded foam at outer thighs offers additional protection against knocks and bumps - Flatlock seam finish ensures mobility and comfort through the rider's full range of motion - High performance, Italian-made chamois with triple-density foam, rapid sweat absorption technology, anti-bacterial properties, and Eschler top fabric - Soft brushed Boxer Style elastic waistband - Custom elastic leg hem holds the short in place - Inner lower leg opening features 'slip panel' designed to glide over protection

The Flow upper protective jersey is specifically designed for Enduro and Trail riding. It features a certified Xmatter protective foam to protect your spine and larger surface of your back. Two small and integrated stash pockets allow packing most important tools. A tight fit, an ergonomical cut and a high level of moisture wicking and breathability provide highest comfort and safety. iXS protectors meet European safety standard EN1621-1 and EN1621-2 respectively. Key technologies - X-matter: Flexible Viscoelastic polymer absorbs forces upon impact without hindering range of motion. The open cell compound is engineered to withstand multiple impacts in the same region while retaining its shock absorbing properties. -FlexZip: Stretchable and flexible zipper allows garments to move with contours of the body without excess bunching. - Aeromesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking.

Go big with confidence. Fox's Titan Race Liner Shorts offer exceptional protection for the serious gravity and trail riders out there. • Multi paneled articulated main body construction • Anatomically shaped molded foam hip pads • 1 piece molded chamois for comfort

Designed to be our most pedal-friendly protection, the Youth Enduro Elbow Sleeve has you covered wherever the trail takes you. These sleeve-style guards are designed using a moisture-wicking micro-lycra material with a nylon mesh rear panel for increased airflow. The D3O elbow inserts provide the perfect balance of comfort and protection as you get rowdy on the trail, and are removable so you can wash the sleeve itself. With silicon grip to hold the guards in place, these are great, minimal-feel elbow guards for young rippers.

Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside