Protective/Armor

A lightweight chest protector with premium hard-shell roost protection. CE tested and certified, the 3D design and adjustable waist straps offer a close fit that is comfortable as well as ventilated and works with or without a Leatt Neck Brace. Next step up in protection level is the 4.5 Chest Protector Junior with impact foam. - Total Leatt protection score of 3 points - Hard shell protector - CE tested and certified as roost protection: Chest EN14021 - Our 3D design ensures a great fit that is very comfortable - Padded base layer to prevent hard shell rubbing on skin - Close fitting allows for over or under the jersey use - Liberal venting helps keep rider cool - Recessed front/rear areas and BraceOn neck brace fitting system allow over/ under the shirt Leatt neck brace fit - Adjustable waist straps for great fit - Weight: 550g Junior fits two sizes: - Small/Medium = 134 – 146cm, 4ft 5" – 4ft 9" - Large/XX-Large = 147 – 159cm, 4ft 9" – 5ft 3"

The Agent knee pad 3D-molded foam insert hardens on impact for confident protection, bolstered by additional side padding for 360-degree knee protection. These pads stay put thanks to the adjustable thigh and calf straps enhanced with silicone gripper elastic. The Agents are built with a pre-curved ergonomic fit for total comfort plus an open back for cooling airflow, which we know you'll appreciate all the way up and down. - 3D shaped midweight CE certified knee protector - CE certified to EU 2016/425 (CRITT protocol VTT-007) - Perforated and breathable construction - DK Impact energy-absorbing foam technology - Polygiene Odor Control technology - Lateral and medial side protection - Interior patella support and back of calf compression for a secure fit - Adjustable thigh strap - Silicone gripper elastic

- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 foam pad provides certified impact protection. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability. - Silicone patch at shin combats slippage. - Unisex size range.

TERATEC Plus Protection is designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

- Constructed with Armortex a tough elastic fabric on the front panel of the pads that enhances durability - Slytech shock absorption foam intelligently and progressively adapts to different forces and impact speeds for thorough protection

We developed the Bluegrass Solid D3O® elbow pads to be as adjustable as possible to avoid the pain of arm pump without losing stability during the ride. With D3O® shells and extra soft pads at the sides, the Solid D3O® provides protection and comfort. - Protectors compliant with EN 1621-1, Level 1 - D3O® Technology - Side soft pads - Extended sleeve - Silicone grippers - Top and bottom straps - Strong, durable Kevlar fabric - Breathable Air Mesh fabric

The Bluegrass Wolverine riding shorts are an incredibly tough and durable choice, either for downhill, all-mountain, or even BMX. Designed to give a superbly comfortable experience while in the saddle, the Bluegrass Wolverine shorts are made with stretchable mesh fabric for an excellent fit and breathability. Working in synergy with our Bluegrass armor, the Wolverine shorts can be attached with clip-hooks at the side of the vest, so pads won’t shift around while riding. - Dual-density seat pad - EVA foam inserts on thighs, hips and tailbone - Stretch mesh fabric - Elastic waistband - Silicone grippers and armor clips

The Bluegrass Protectives Seamless Lite D3O® is the most breathable and comfortable armor for mountain biking. A unique product that’s made for long rides, keeping your back protected downhill, whilst remaining exceptionally comfortable when pedaling. A back protector you can wear for everyday rides. - 80% Polypropylene, 10% Polyamide, 10% Elastan - Seamless construction ensures adherent and ergonomic fit - Unisex fit to accommodate all body shapes - Dryarn® microfiber guarantees the highest level of performance for next-to-skin fabrics - Open mesh enhances ventilation and sweat evaporation - Quick-drying microfiber works to regulate body temperature - Dermatologically tested microfiber to eliminate bacteria and odor - Back protector D3O® BP4 L1 (removable) - D3O® insert compliant with EN 1621-2:2014 - Two rear pockets for snacks and soft items - Lightness and flexibility gives you freedom of movement - Long-length bottom to be dressed into the pants maximizing stability - Hand wash only. Use only mild soap and water to clean your protector.

- Knee/elbow pad combo pack in a mesh bag - Available in multiple kid-approved designs

Pedal-friendly, pro-level impact coverage. Designed for gravity-fueled riding with input from Dakine team riders, these mountain bike knee pads are designed to articulate while you pedal, so they stay in place as you ride. A skid plate and foam padding combo disperse impact loads, while the breathable build keeps the air flowing to keep you dry and comfortable. They are remarkably lightweight to boot.

Go-To Pedal-Friendly Knee Pads For Ce-Certified, All-Mountain Protection The Slayer Knee Pads set the standard for lightweight, pedal-friendly, and CE-certified knee-pad design. Featuring dual-density DK Impact foam and a durable Cordura outer, these pads maintain a breathable design that's light and comfortable enough for longer rides and hot weather. Their pre-curved shape and flexible foam design maintain a custom-fit feel, while silicon gripper cuffs ensure a slip-free fit. Integrated odor control helps fight the stink factor. - 1 Year Limited Warranty - Lightweight, low-profile CE-certified knee protector (EN 1621-1 Level 1) - Dual-density DK Impact energy-absorbing foam technology - Cordura abrasion resistance - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

The SURPASS from 100% is your ultimate choice for no compromise, all-in-one coverage. Featuring a Level 2 impact rating, this gear really does everything well—light enough for cross country, protective enough for downhill and breathable enough for all your pedaling needs. - Rubberized ventilated outer skin - Strategically placed perimeter embossed foam padding with ventilation - Fully ventilated plastic protective cup with high-impact absorption - Pre-curved chassis for attack position - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Thigh cinch for customizable fit and security - Calf cinch for added security - Impacted Tested with Maximum Level 2 Protection

The SURPASS from 100% is your ultimate choice for no compromise, all-in-one coverage. Featuring a Level 2 impact rating, this gear really does everything well—light enough for cross country, protective enough for downhill, and breathable enough for all your pedaling needs. - Rubberized ventilated outer skin - Strategically placed perimeter embossed foam padding with ventilation - Fully ventilated plastic protective cup with high impact absorption - Pre-curved chassis for attack position - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Thigh cinch for customizable fit and security - Forearm cinch for added security - Impacted Tested with Maximum Level 2 Protection

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling

Easy to pull on. Easy to pedal in. Easy to forget you're wearing. The Slayer Bike Knee Sleeves offer low-profile padding for hot days and all-mountain riding. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match the shape of your leg. Snug-fitting, four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable knee pad - Perforated DK Impact energy absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

Lightweight and breathable enough to forget you're wearing them, the Slayer Bike Elbow Sleeves offer low-profile padding for hot days and all-mountain rides. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match your arm. Snug-fitting four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable elbow pad - Perforated DK Impact energy-absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection

The Slayer Pro Knee Pads build on the design of the Slayer Pads. They're still lightweight and designed for riding the up and down but with the added benefit of strategic side padding and an adjustable elastic fit strap. The dual-density DK Impact foam and durable Cordura outer offer CE-certified protection. The pre-curved shape and flexible padding create a custom-fit feel, while full-stretch mesh back panels maintain all-day breathability. Integrated odor control helps fight the stink factor. - Shell: Cordura Polyester, 4-way stretch AriaprenePro, 4-way stretch mesh back: 75% Polyester 15% Nylon 5% EVA - Insert: 100% DK Impact Polyurethane foam - Low-profile CE certified knee protector with added side padding (EN 1621-1 Level 1) - Dual density DK Impact energy-absorbing foam technology - Adjustable elastic strap, seamless calf band and silicone gripper elastic lock pad in place - Cordura abrasion resistance - Polygiene Odor Control technology - Pre-curved ergonomic patterning for pedaling comfort

- Flexible lateral YKK zipper for improved mobility - Shoulder protectors (level 2) are easily adaptable by means of the - AIROFLEX straps and magnetic FIDLOCK buckles—even when wearing gloves - Odour prevention: treated with Polygiene Odor Crunch - Machine washable

The Slayer Elbow Pads set the standard for lightweight, breathable and CE-certified elbow pad design. Featuring dual-density DK Impact foam and a durable Cordura outer, these pads maintain a breathable design that's light and comfortable enough for longer rides and hot weather. Their pre-curved shape and flexible foam padding design maintain a custom-fit feel, while silicone gripper cuffs ensure a slip-free fit. Integrated odor control helps fight the stink factor. - Shell: Cordura Polyester, 4-way stretch AriaprenePro, 4-way stretch mesh back: 80% Polyester, 20% Nylon - Insert: 100% DK Impact Polyurethane foam - Lightweight, low-profile CE-certified elbow protector (EN 1621-1 Level 1) - Dual-density DK Impact energy-absorbing foam technology - Cordura abrasion resistance - Polygiene Odor Control technology - Open-back design increases breathability - Pre-curved ergonomic patterning for enhanced fit

The Launch Elite Knee/Shin Guards offer an excellent combination of impact-absorbing protection with a fit that ensures mobility while riding. The CE-certified D3O LP1 inserts provide world-leading impact protection, while the engineered SuperFabric skid panels deliver maximum durability and flexibility. Featuring extended Poron shin coverage, plus bonded Poron pods at the side of the sleeve for additional side knee coverage, these guards earn their Elite name. Lightweight, and constructed in a minimal sleeve style, they'll bump up the comfort and flexibility while on the bike without sacrificing protection from trail hazards. Large elastic gripper panels help keep the guards in place while riding or during impact, and the material features an antimicrobial treatment to reduce odor-causing microbes. Shred with confidence with the protection of our Launch Elite Knee/Shin Guards.

Specifically designed with the growing Enduro scene in mind, the Indy Elbow combines the unrestricted mobility of the Race Face Charge Elbow pad with the added impact protection of D30. - Butterfly mesh sleeve with second skin fit and targeted coverage - D30 high performance shock absorbing foam covered by stretch Kevlar - Silicone gripper along inner top opening ensures 'stay-put' fit - Elastic top strap with Velcro closure for adjustment

- Removable D30 high-performance shock absorbing protective foam at hips - Butterfly mesh throughout ensures a second skin fit to keep targeted hip protection in place - Highly durable mesh panels at inner thigh ensure maximum venting - Custom heat-moulded foam at outer thighs offers additional protection against knocks and bumps - Flatlock seam finish ensures mobility and comfort through the rider's full range of motion - High performance, Italian-made chamois with triple-density foam, rapid sweat absorption technology, anti-bacterial properties, and Eschler top fabric - Soft brushed Boxer Style elastic waistband - Custom elastic leg hem holds the short in place - Inner lower leg opening features 'slip panel' designed to glide over protection

The Carve EVO+ guards are light and extremely comfortable to wear. These guards are ideal for more demanding use due to the integrated Xmatter padding that allows for high impact absorption and protection. With the Carve Evo+ we introduce product properties like exchangeable padding, and structurally tough AeroMesh that offers a high level of comfort and structural strength. - Xmatter protection foam (exchangeable) - Low friction impact shells to absorb and distribute impact - AeroMesh light, moisture wicking, breathable, anti-bacterial - LoopLock closures - Silicone stopper - EN1621-1:2012 certified

- LITESHIELD PLUS back protector (EN 1621-2, level 2) - Shoulder protectors (EN 1621-1, level 2) and chest pad for increased protection - Mesh inserts for improved ventilation - Special hydration bladder pocket with interior hose routing and tool pocket - Odour prevention: treated with Polygiene Odor Crunch - Structured silicone coating on inner seams prevents slippage - Machine washable

- Partnering with engineers at Rheon Labs Chromag has created a unique pedal friendly knee pad that does not skimp on protection

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mold with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. - High length compression design to prevent the pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2

The EVOC ENDURO SHIRT belongs to our protector clothing line. It is our protection shirt with optimum wearing comfort, which protects your shoulders and chest in case of a crash. The perfect complement to our PROTECTOR BACKPACKS. - CE-Certified shoulder protectors - Abrasion-resistant chest padding - Removable protectors allow machine wash - Weight: 320g

The Flex Shorts offer protection on the hips, coccyx and thighs. Areas prone to injury or re-injury can now be protected with a compression fit short that flexes to the body's shape in all types of riding. - Flexible curve 1mm flexible side panels for a contoured fit and polygon perforated foam pads on the hips and legs - Rear yolk designed to protect the coccyx - All pads are removable for washing - Double layer polygon foam for increased ventilation and airflow - Jaquard knit elastic waistband and compression fit - Designed beyond CE EN 1621/1 Standards

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage