Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX landing page

Odyssey Cable Knarps
$3.99
- Sold in pairs - Allen wrench included
Odyssey Par Ends
$4.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
Odyssey Graduate Peg Replacement Sleeve
$5.99
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly
Odyssey M2 Monolever Brake Cable
$5.99
The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible
Odyssey Gyro G3 Lower Cables
$6.99 - $8.50 $8.50 Up to 18% Off
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Rant Spring Brake Pads
$6.99
Clear Brake pads from Rant. Spring Brake Pads are constructed with an internal alloy plate to keep them stiff and tacky clear rubber for maximum braking performance. Available with a threaded post and includes all necessary mounting hardware. Sold in pairs. Mid-length pad. Colours: Clear with black internals and hardware.
Odyssey Gyro G3 Upper Cables
$7.99 - $8.50
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Rant Break Em Chain Tool
$7.99
The Rant Break ‘Em Chain Tool features an extra-long handle to provide the leverage needed to remove pins smoothly. The breaker is spec’d with an adjustable barrel that lets it work with both 1/8” and 3/32” chains. The barrel also helps keep the pins centered for easy installation and removal. Compact & light weight.
Odyssey Ghost Brake Pads
$8.50
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Rant Spring Linear Brake Cable
$8.99
Brakes are only good as the cable - The Spring Brake Cable features a straight linear style housing that reduces compression, increases braking response and overall stopping power. Won’t kink up on bar spins. And they also feature a Teflon coated inner wire for a smooth pull.
Subrosa Combat Lights
$8.99
Bright enough to be seen from up 1950 feet away, but is also small enough to be easily taken on and off and stows in a pocket when not in use. Covered with a soft, durable, and water-resistant silicone body that is impact resistant LED light is visible up to 1950 feet Three Light Modes: Steady, Fast Flash, Slow Flash Powered by two coin cell CR2032 batteries Smaller strap length fits on most types of BMX bars Run Time: 38 hours in Steady Mode, and 175 hours in Flashing Mode
CULT 410 Chain - Black
$9.99
The Cult 410 chain is a strong and affordable 1/8" chain based on the original KMC 410 with stamped Cult logos and a Teflon coating. Includes a preinstalled half link to make fine tuning the length easier. Width: 1/8" Total Links: 100 Weight @ 72 Links: 7.9 oz Masterlink: No, half link pre-installed Tool: Park CT-5 or CT-3.2
Demolition Crank Puller for Revolt Cranks
$9.99
- Heat-Treated Chromoly - 19mm tool works on Revolt 19mm cranks
Kink Carabiner Spoke Wrench
$9.99
- Made from 7075-T6 aluminum - Fits 3.45mm (0.136?) spokes - Clip it on to your jeans - Hang your keys -True your wheels with it
Kink Master Clamp
$9.99
- CNC Machined from 6061-T6 Aluminum - Ultra Slim and Low Profile Design - Custom 5mm/6mm Combination Bolt - Weight:0.7oz
Odyssey Broc Raiford Signature Grips
$9.99 - $11.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
Odyssey Reversible Bar pad
$9.99
Features: - Velcro closure - 2-in-1 reversible style - Embroidered gold Slugger logo on flannel pattern (Side 1) - White Futura logo on black (Side 2)
Odyssey Slim-By-Four Brake Pads
$9.99
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.
Odyssey Warnin' Grips
$9.99 - $10.99 $9.99 - $11.99 Up to 17% Off
Warnin' grips from Odyssey BMX. - Gary Young signature - Dual compound for comfort and durability - Par Ends included Flange: No Lock On: No Grip Shift Specific: No Length: 165 mm Shape: Round
Rant Spring Brake Lever
$9.99
2 finger, medium reach lever from Rant with hinged clamp for easy installation and removal. Material: die-cast alloy construction. Weight: 90g.
Rant Trill Pedals
$9.99 - $17.99
The Trill pedals by Rant are molded from a durable nylon/fiberglass compound that slides like butter on grinds. They're firmly installed through its durable Chromoly axles, holding up to countless beatings. Technical features: Micro-knurled surface with 13 molded pins per side for increased traction Pedal body made from a nylon/fiberglass compound, light and smooth Pedal axles made from heat-treated 4130 Chromoly, maxing out on durability
Shadow Conspiracy Hollow Bolts
$9.99 - $10.99
Compatible with all Shadow and most metric stems on the market 25mm length 6mm hex head Heat treated Sold in sets of 6 Weight: 0.3 oz each
Sunday Jake Seeley Signature Grips
$9.99 - $11.99
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
CULT Ricany Grips
$10.95
The Ricany grip is Sean Ricany's signature model that features a proven pattern with a soft and grippy compound. Flange: No Lock On: No Grip Shift Specific: No Shape: Round
GSport G.L.A.N.D. MK IV Hub Guards
$10.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
Odyssey Springfield Lever
$10.99 - $14.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.
Rant Strap On Front Hub Guard
$10.99
The Rant Strap On Guard is a universal fit front guard molded from the same durable nylon composite as Rant Pegs. Designed for fool proof installation, the strap ports line up directly with 3 cross pattern on front hubs with a maximum flange diameter of 55mm. Includes 3 nylon straps.
Shadow Conspiracy Maya Grips
$10.99
The Maya grip features a proprietary DCR formula material in a honey comb pattern.
Shadow Conspiracy Ol' Dirty Grips DCR
$10.99
- Flangeless symmetrical design - Proprietary DCR rubber - 160mm length - Shadow nylon bar ends included
The Shadow Conspiracy Gipsy DCR Grips
$10.99
The Gipsy grips are Simone Barraco's signature grips molded from a proprietary DCR rubber formula for maximum comfort and performance.
Black Ops Detangler Rotor Cable Hardcore
$11.39
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: Up to 7.5" - Diameter: 1.5mm
Black Ops Detangler Rotor Cable Vert
$11.39
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 9.5 - 11" - Diameter: 1.5mm
Animal JD Seat Clamp
$11.99
28.6mm (1-1/8") investment cast cromo bolt broached for 6mm hex 1.6 oz
Odyssey BOSS Aaron Ross Signature Grip Black/Green Swirl
$11.99
The Odyssey Boss grips are Aaron Ross' updated signature grips made from a soft Krayton rubber compound with a low profile block pattern for improved grip. Includes Odyssey Par End plastic bar sends. Sold in pairs. - Diameter: 31mm - Length: 158mm - Bar Ends: Odyssey Par Ends
Odyssey Clutch v1v2 Non-Drive Side Collar
$11.99
Replacement non-drive side collar for Clutch v1/v2 freecoaster hub.
Odyssey Linear Slic Kable w/K-Shield
$11.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm
Subrosa Griffin Grips
$11.99
- Mark Burnett Signature Grip - Proven DCR material - 170mm length - Includes Subrosa Nylon bar ends
Sunday Cornerstone Grips
$11.99
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.
Volume Bikes VLM Grips Flangeless
$11.99
- Soft Vex Krayton Rubber to be Soft & Durable - Durometer: 25º - Diameter: 28.7mm - Flange-Less Length: 150mm
Merritt BMX Billy Perry Grips
$12.00
Billy's new signature mushroom style grip. Based on the proven Sawyer grips pattern, now longer and all new super soft compound. 167 mm long. Colors available brick red, gum, black, purple, tar heel blue and military green.
Colony RX3 Rotary Upper Gyro Cable
$12.95
2016 Colony RX3 Rotary Gyro Cables. • Twin Upper Cable design.
Colony Stem Gyro Plate
$13.95 - $16.95
• Full CNC machined from 6061T6 Alloy. • Designed for use with our Official, Variant & Squareback stems. • Weight: 15 grams (0.52oz)
Shadow Conspiracy Little Ones Peg 4.33
$13.95
The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.
Animal Nigel Grips
$13.99
The Animal Bikes Edwin signature grips feature a soft mushroom pattern with standard flange.
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Subrosa Noster Fork Top Cap
$14.00 $14.99 7% Off
Replacement top cap to fit Subrosa Noster forks, featuring a 6mm allen key hole and H18 thread.
Odyssey Race Linear Kable
$14.99
Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable. - Length: 60 – 65mm - Black
Shadow Conspiracy Little Ones Peg
$14.99 - $16.99
The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.
CULT Butter Light Peg 110mm Nylon
$15.99
Butter light pegs have an aluminum core with a Perlon-Nylon 6 sleeve. - Sold individually - 14mm peg with 3/8" adaptor - Color: Black - Length: 110mm - Diameter: 4
Demolition Trooper Plastic Pedals
$15.99
- Sold in Pairs - Designed With Team Input - 10 Square Molded Pins - Horizontal Concave for Grip - Nylon Plastic Body for Extra Life - 2 Unsealed Bearings - Heat Treated CRMO Spindle - 9/16? Size Only (Fits Three-Piece Cranks) - Weight: 14.5 oz (pair).
GSport Uniguard Hub Guard
$15.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.
Odyssey Bluebird Chain
$15.99 - $16.99
For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
Odyssey MPEG 14mm Chrome Pegs
$15.99
The MPEG is a 4140 chromoly peg with three possible positions for longer peg life. - Sold as pairs - 4" x 1-3/8"
Subrosa Bitchin' Bar Ends, Black
$15.99 - $18.99
Laser etched logo 7075 alloy, CNC machined Expansion style wedge fits most bars cut or uncut Weight: 0.75 oz
Rant Spring Brakes II
$16.99
With the proliferation of wider frame rear ends and the use of super wide tires, we decided to upgrade the Rant Spring Brake II to be even more functional and better looking. A total redesign, we increased clearance and gave a high end look with low profile open springs, refined shape and debossed Rant logo. Compatible with up to 2.5 wide tires. Includes all hardware to dial in your ride.
Merritt BMX P1 PC Pedals
$17.00
The Merritt P1 Pedals have a low profile design that uses a special nylon/fiberglass blend that increases strength and extends pedal life.
Merritt BMX S.I.R. Peg 14mm
$17.99
The S.I.R. Pegs are made of 4140 chromoly that is first forged, followed by CNC machining, then finally heat-treated to increase strength, durability and performance. Built to last without being over weight. 37mm x 100mm and available for 10mm and 14mm axles. Specs: Length: 100mm / 4 Diameter: 37mm Axle: 10mm or 14mm Weight: 190g / 6.7oz
Rant Fix 'Em Crank Puller
$17.99
Designed to install and remove Rant Bangin’ 48 Cranks and all others that use 3/8” x 24 tpi spindle bolts. Pound ‘em off and press them back on. Easy as that! Heavy duty heat treated steel construction can take the abuse. Features: - Heavy-duty steel construction - 2-piece design for pushing and pulling - Compatible with 19mm 3/8” x 24 tpi spindle - Weight: 5.6 oz.
Rant Squad Tire 20x2.3
$18.99 - $19.99 $18.99 - $20.99 Up to 5% Off
The Rant Squad Tire is a great tire for all around use, from dirt to park to street. The Rant designed and exclusive tread design offers a large contact area with minimal rolling resistance. We also added micro- knurled surface for optimum performance and improved traction.The medium pressure rating helps cushion those big drops. The Squad Tire is ready to shred all! - Size: 20” x 2.35” - Low profile all around tread with micro knurling - Tire pressure: 35-60 psi - Weight: 27 oz
Odyssey HGS Spokes
$19.60 - $19.99 $19.99 Up to 2% Off
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
Page 1 of 3 Next page