BMX

Simple and easy to install. Includes an assortment of spacers to optimize chainline and crank clearance and an Odyssey 6061-T6 aluminum dust spacer. For press-fit MID bottom bracket frames For 19mm crank spindles and press-fit Mid BB frames

Saddle Ody MX Spinner Cap by Aaron Ross, Sublimated Tie Dye Design, Red Woven. Item Specifications: Gender/Age: Unisex. Color: Dashboard Rail: Pivot Size (LxW): Fat. Use: BMX

Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.

Tom Dugan's signature DGN v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip Six bolt clamping configuration Headset pre-load bolt recess (32mm diameter)

When you can’t even see a part, you might forget about it, but it doesn’t mean it's not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims sharp edges. Good rim strips didn’t exist for BMX rims. These GSport High Pressure Rim Strips work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job. Available in Black only. Sold in Pairs.

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

The Graduate Peg features a 4130 core with a plastic sleeve. Full 4130 core 1.5" outer diameter 14mm with 3/8” adaptor Sold individually

Replacement parts for Odyssey Grandstand Pedals. Left or Right spindle.

Odyssey's popular Clutch v2 Freecoaster Hub laced to the tried and true Hazard Lite Rim for your convenience. - 3/8" - 36H - Color: Black

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims sharp edges. Good rim strips didn’t exist for BMX rims. Odyssey Complete Wheels and Odyssey Rims came with some of the best and widest rim strips around, so eventually Odyssey decided to make them available to everyone. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job. Specs Diameter: 20" Width: 30mm

Railed seat sales are on the rise, so Odyssey needs a post to go with them. That means the classic Odyssey Intac post is making a comeback. The Intac is a lightweight aluminum post with built in micro adjust seat guts. Features Lightweight aluminum Micro-adjust seat guts 25.4mm size

Aaron Ross signature keyboard grips. - Aaron Ross signature hand picked emoji pattern - Par Ends included

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

The Odyssey MDS2 La Guardia sprocket is a complete redesign of Odyssey's popular MDS sprocket with various improvements and enhancements to accommodate today's riders. The La Guardia is CNC machined from 7075 aluminum and features a built-in full sprocket guard to protect the sprocket teeth and chain from damage. The sprocket increases in thickness towards the guard to further increase strength and durability, and offers enough chain clearance to fit the widest BMX chain available today. Teeth: 1/8" Bore: 24mm Adapter: 19mm Included Weight: 4.6 oz

- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)

Matt Nordstrom Signature edition stem features special surface contouring and a larger bolt head spec for superior handlebar grip. Steerer Clamp Diameter: 1-1/8" Color: Black Stem Type: Top Load Bar Clamp Diameter (mm): 22.2 Defined Color: Black Reach: 45 Rise: 30

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

Odyssey R BMX Forks - Custom tapered, butted and specially formed legs - Improved grind and guard clearance - Built-in headset race - 3/8" 32mm Offset

Made to fit all 22mm crank spindles and press-fit Mid BB frames. Simple and easy to install. Includes an assortment of spacers to optimize chainline and crank clearance. Odyssey 6061-T6 aluminum dust spacer included.

Odyssey 7KA rims are the original 7000 series aluminum BMX rim, and have long been a top choice for custom wheel builds. Laced to Antigram v2 cassette hub. ANTIGRAM V2 CASSETTE HUB - 2014-T6 forged aluminum hub shell - 6903RS sealed cartridge ball bearings - 14mm, 4130 chromoly axle bolts w/17mm 4130 chromoly female axle - 9t driver with 3-Pawl independent springs design and precision caged needle bearings - RHD/LHD switchable - Replaceable plastic hub guard included SEVEN KA RIM - 7000 series aluminum - 34mm wide - 17mm tall - 390 ERD - 36H

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

Laboratory tested and team proven Updated open-ended spindle cap New wedge cluster band with greater flexibility Never-Wobble crank arm and spindle interface guarantee 41-Thermal lifetime replacement warranty against bending, cracking and breaking Traditional spocket interface with 22mm spindle Bottom bracket not included

Odyssey's new Travel Wrap. Throw it into your backpack and you're good to go. Velcro enclosed main compartment Two smaller pockets Strap and buckle

Odyssey have given their popular Traveler Bike Bag a massive update, re-engineered with improved materials and overall construction. Keeping the Traveler Pro as easy as possible to transport and use Odyssey added features like a retractable handle along with reinforcements in key wear areas keeping the Traveler going for a long time. Features: - Fully re-engineered - Retractable handle - Heavy-duty YKK zipper - Improved wheels - More padding - Extra handles - Reinforced seams & corners - Shoulder pads / strap keepers - Interior pockets & stealth cover - Improved materials & construction toughness - Fits most modern 20” freestyle BMX bikes - Weight: 4.6Kg (10lb 3oz)

Soft foam construction with printed ODI logo Stylish way to prevent thumb blisters from riding flanged grips gloveless

The Transit V3 cranks are affordable tubular chromoly 3pc cranks with a super strong cold-forged 19mm spindle. Featuring 8mm hex flush spindle bolts and 6mm hex pinch bolts to easily and securely tighten down your cranks. They are right and left-hand drive compatible and come in various lengths and colors!

The S.I.R. Pegs are made of 4140 chromoly that is first forged, followed by CNC machining, then finally heat-treated to increase strength, durability and performance. Built to last without being overweight. 37mm and 5 inches long. Comes in 14mm with 3/8ths adapter.

Heat treated 4130 cranks from Merritt. The battle cranks are built for maximum strength with stiff rectangular arms and hollow 22mm spindle. These cranks also feature angle cut spindle bosses that have rubber plugs to help prevent ankle bite.

Billy's new signature mushroom style grip. Based on the proven Sawyer grips pattern, now longer and all new super soft compound. 167 mm long. Colors available brick red, gum, black, purple, tar heel blue and military green.

Brandon's signature GFE plastic pegs use a 4140 steel core to keep the size down and allow for thicker stronger plastic. Each peg sleeve has a steel washer molded in to keep your peg in place. 14mm with spacer. Sold individually. GFE peg weight: 6.5 oz. GFE peg sleeve weight: 2.1 oz.