BMX

Fits in any frame designed for 27.2mm posts and reduces to 25.4mm. Shim is 3? long and is slotted to allow seat clamp to tighten.

Need to replace your Sano Brakes Straddle Cable & Knarp? -Includes Straddle Cable, Knarp And Cable End -Customize To Fit -Compatible With Most U-Brakes

Square wood coaster with S&M logo. Made in USA.

Rookie bottom bracket from Salt, featuring stainless bearings. Includes all spacers and cones for adjustment

The Cult 410 chain is a strong and affordable 1/8" chain based on the original KMC 410 with stamped Cult logos and a Teflon coating. Includes a preinstalled half link to make fine tuning the length easier. Width: 1/8" Total Links: 100 Weight @ 72 Links: 7.9 oz Masterlink: No, half link pre-installed Tool: Park CT-5 or CT-3.2

The SE Bikes Life donuts not only protect your inner thumb from abrasion, but they also add some unique style to your ride - Made from neoprene foam - 5mm thick

Foam neoprene donuts prevent blisters and discomfort associated with high flange BMX grips - Adorned with the SE Bikes wing logo - Available in a variety of colors

Slicker sleeves are plastic peg covers designed for use with Little Ones pegs. - Little Ones pegs lock into plastic sleeve - Injection molded composite construction - Sold each

Male bolts for G Sport hubs. For 14mm Axles, and featuring both 17mm wrench flats and 6mm hex broach

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

This pro-level spoke wrench is comfortable enough for doing daily full-on wheel builds and features G-Sport’s proprietary taper-hex nipple slot on one side and the traditional 3.2 (Zero/Black) spoke nipple slot on the other. Made from chromoly steel. Dual sided interface for greater versatility Taper-Hex slot delivers superior torque to G-Sport Taper-Hex nipples 3.2 (Zero/Black) slot works with traditional BMX spoke nipples Tough chromoly construction fights everyday wear and tear

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Features -Short, Medium, or Long to fit a range of handlebar sizes -Fits most detangler systems -Designed specifically for GTX-S and G3 Gyros

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

Brakes are only good as the cable - The Spring Brake Cable features a straight linear style housing that reduces compression, increases braking response and overall stopping power. Won’t kink up on bar spins. And they also feature a Teflon coated inner wire for a smooth pull.

How are we going to see that work if your slippin' off the pegs? Don't worry Theory has you covered with pre-cut hassle free installation grip for your pegs. All the traction you need to keep you on them pegs flexin' those combos. 4.5" x 4.5"

- Full lever grip that protects the entire lever and your body in a freak accident - Insulates the lever from extreme cold - Makes the lever easy to reach and grab offering unique modulation - Protects the lever from scratching other bikes and from damaging the lever itself - Stays sticky in inclement weather

Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.

The Rant Have A Bike Day (H.A.B.D.) Grips are a simple and straightforward classic mushroom style grip. Constructed of proven DCR rubber, theH.A.B.D. grips are stylish, comfortable and durable grips. Ribbed for your hands pleasure…

The Rant Strap On Guard is a universal fit front guard molded from the same durable nylon composite as Rant Pegs. Designed for fool proof installation, the strap ports line up directly with 3 cross pattern on front hubs with a maximum flange diameter of 55mm. Includes 3 nylon straps.

The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.

Linear style cable provides stiffer braking & resists kinking. Tons of colors. Go ahead and start stopping. -Linear style cable provides stiffer braking and resists kinking -5mm Teflon lined linear housing -50? long -1.6mm Teflon coated inner wire -Alloy ferrules for durability

Brandon Begin signature flangeless grip from Cult made from a sof Krayton compound rubber with a thin diameter. Bar ends included.

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Quality chain that is great as a replacement or upgrade. Heat treated pins and rollers keep it strong. Includes 96 links with bushingless design.

- Soft Vex Krayton Rubber to be Soft & Durable - Durometer: 25º - Diameter: 28.7mm - Flange-Less Length: 150mm

Mike Hoder’s signature grips are made in the USA by ODI from a Super Soft compound for the feel Mike wanted. At 31.5mm they are a little Bigger Than Most to help cushion some of Hoder’s infamous landings.

Odyssey's new Travel Wrap. Throw it into your backpack and you're good to go. Velcro enclosed main compartment Two smaller pockets Strap and buckle

The SE Wing grips feature a classic and comfy mushroom pattern with the SE Wing logo embedded for extra grip. The raised outer flange is debossed with “We Make it Happen” and is sure to keep your hands in place. Key Features: Made from comfortable Pruven rubber compound 135mm length Includes SE rubber end caps Available in black, white, red and blue

Byron Anderson is an OG Shadow rider and product designer extraordinaire. Back in the day, he designed the Shadow Ol’ Dirty Grip as his signature grip and it was one of our most popular grips. So we got together with Byron and have brought it back with updated features and constructed it with our durable and soft DCR material. Opposing rib cells provide excellent feel, durability, and grip. Guaranteed to be your favorite grip again.

The Gipsy grips 160mm length and proprietary rib design give it the feel and circumference of a stretched grip right off the shelf, while symmetrical ends allow the grip to be installed in either direction depending on rider preference. A performance grip for a high performing rider!

The Maya grip features a proprietary DCR formula material in a honey comb pattern.

Aaron Ross signature keyboard grips. - Aaron Ross signature hand picked emoji pattern - Par Ends included

Aaron Ross signature keyboard grips. - Aaron Ross signature hand picked emoji pattern - Par Ends included

Warnin' grips from Odyssey BMX. - Gary Young signature - Dual compound for comfort and durability - Par Ends included Flange: No Lock On: No Grip Shift Specific: No Length: 165 mm Shape: Round

- Form meets function with these comfy SE Bikes Life Grips - The soft Pruven rubber compound allows long days of riding without hand fatigue - Includes SE rubber end caps

Billy's new signature mushroom style grip. Based on the proven Sawyer grips pattern, now longer and all new super soft compound. 167 mm long. Colors available brick red, gum, black, purple, tar heel blue and military green.

Edwin Delarosa Signature Grips. 1-ply Design. Comes With Push-in Style Barends.

The Odyssey Linear Slic cable features a pre-stretched inner 1.5mm Slic Kable® covered in a linear casing to prevent binding, and an outer K-Shield™ mesh housing for less weight over a standard steel mesh housing

LED bike lights from Odyssey BMX. These easy to install/remove lights are sold in pairs (front & rear) and have two functions (flashing & constant). These lights will help you stay safe while still cruisin the streets. - 125mm x 26.5mm x 22.5mm - Fits on 18mm to 32mm diameter tubing - CR2032 Battery

With the proliferation of wider frame rear ends and the use of super wide tires, we decided to upgrade the Rant Spring Brake II to be even more functional and better looking. A total redesign, we increased clearance and gave a high end look with low profile open springs, refined shape and debossed Rant logo. Compatible with up to 2.5 wide tires. Includes all hardware to dial in your ride.

Now at a 4.5" longer length, the JPEG features three rotation positions and are reinforced internally for longer life. Sold individually. Heat Treated 4140 chromoly 14mm with 3/8” adaptor 3 Rotation positions

Rookie bottom bracket from Salt, featuring stainless bearings. Includes all spacers and cones for adjustment

Mid Bottom Bracket Sealed Bearings Crank Arm Spacers & Tube Spacer Included Weight: 6 oz Mid BB (only compatible with Mid BB Frames)

Demolition molded plastic platform pedal, not from a catalog but our own design that our team had input in. Features a nylon plastic body with 10 square molded pins for added grip. Concaved horizontally to grip the sole of your shoe better and for added comfort. Also features a solid heat treated CRMO spindle. Unsealed bearings.

The S.I.R. Pegs are made of 4140 chromoly that is first forged, followed by CNC machining, then finally heat-treated to increase strength, durability and performance. Built to last without being over weight. 37mm x 100mm and available for 10mm and 14mm axles. Specs: Length: 100mm / 4 Diameter: 37mm Axle: 10mm or 14mm Weight: 190g / 6.7oz

The Subrosa "Combat" light is bright enough to be seen from up 1950 feet away, but is also small enough to be easily taken on and off and put in your pocket when not in use. Soft silicon keep it impact resistant, and a smaller strap length makes it fit on all types of BMX bars. Riding without lights is illegal in many cities, so cover yourself with one of these light sets! Available in a front and rear set, or individually. White bulb for front. Red bulb for rear. - LED light that is visable up to 1950 feet. - Covered with a durable water resistant silicone body. - 14 lumen light provides 38 hours of steady light or 175 hours of flashing light. - Flashing light provided in 3 different light modes: steady, fast flash, & slow flash. - Powered by 2 coin cell CR2032 batteries (batteries are included widely available for replacement). - Weight: 24 grams.

Replacement parts for Sunday Saker v1/v2 Cranks. -19mm Spindle -For Saker and OEM 3-PC style cranks. -Spindle bolts not included.

The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.

The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.

The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyper-extension. - One size fits most

The signature Dak pegs feature a super strong chromoly core and a long-lasting nylon sleeve for smooth grinds on the roughest ledges and rails. The exclusive cog design increases the core's end thickness, making this peg even stronger than traditional plastic pegs while preventing the peg sleeve from rotating at the same time. With Dakota Roche's name on it, you know they can take a beating! Sold individually as a 14mm peg with a 3/8" adapter. - Size: 14mm (3/8" adapter included) - Length: 4.5" or 4.75" - Diameter: 38mm - Weight: 7.6 oz (4.5")

While staying true to the original Twisted PC’s style, the Twisted PRO offers a significantly larger body shape, slimmer height, and more concave while still being built around a traditional loose-ball bearing configuration. Features: - High-strength Nylon composite - 12 oversize pins per side - Traditional loose ball bearings - Chromoly spindle - High-strength plastic composite - Wider & longer pedal body - Larger concave area - Slimmer profile Specs: - 9/16-inch spindle - 104mm Width - 98mm Length - 14.6 oz (pair)

The Rant Squad Tire is a great tire for all around use, from dirt to park to street. The Rant designed and exclusive tread design offers a large contact area with minimal rolling resistance. We also added micro- knurled surface for optimum performance and improved traction.The medium pressure rating helps cushion those big drops. The Squad Tire is ready to shred all! - Size: 20” x 2.35” - Low profile all around tread with micro knurling - Tire pressure: 35-60 psi - Weight: 27 oz

The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape.Added advanced micro knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon composite material as the Ravager pedal, with a heat treated chromoly axle that includes a 6mm broach for ease of installation and high end looks. - Injection molded nylon composite body - Heat treated 4140 chromoly broached spindle - 105mm length x 100mm wide - 3.5mm pin height - 12 pins per side - Thickness: 18mm and 24mm at bearing cover

The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape.Added advanced micro knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon composite material as the Ravager pedal, with a heat treated chromoly axle that includes a 6mm broach for ease of installation and high end looks. Injection molded nylon composite body Heat treated 4140 chromoly broached spindle 105mm length x 100mm wide 3.5mm pin height 12 pins per side Thickness: 18mm and 24mm at bearing cover

The Rant Bang Ur BB kit includes 2 precision R12 sealed bearings, 2 CNC machined 6061 aluminum cone spacers for a clean look, an aluminum internal spacer, 4 steel crank arm spacers for dialing in your chain alignment.

The Kink Sever Tire is a 20" BMX tire that has a low profile that rolls fast and gives you a lot of grip. BMX tires take a lot of abuse so Kink made sure the Sever tire had a slightly thicker side wall to hep from tearing and to help cushion hard landings.

Brandon's signature GFE plastic pegs use a 4140 steel core to keep the size down and allow for thicker stronger plastic. Each peg sleeve has a steel washer molded in to keep your peg in place. 14mm with spacer. Sold individually. GFE peg weight: 6.5 oz. GFE peg sleeve weight: 2.1 oz.

The Merritt P1 Pedals have a low profile design that uses a special nylon/fiberglass blend that increases strength and extends pedal life.