Your SEO optimized title

Filter By:

  • Show More Brands

  • Show Fewer Brands

Trainers/Rollers

Tacx Antares
$199.99
With the Antares roller you can cycle freely to refine your coordination and technique. This roller can be retracted to 80 cm. Conical Rollers The Tacx rollers are conical which ensure that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm. FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350 x 470 mm (53 x 18.5 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 470 × 135 mm (31.5 × 18.5 × 5.31 in) Weight: 7.7 kg (17.0 lbs) Trainer Type: Basic , Roller Article number: T1000
Tacx Blue Matic
$199.00
The Blue Matic has been part of our assortment for many years and is very popular among novice riders looking for a trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. Manual Resistance Control The Blue Matic is controlled by a lever on your steer, allowing you to set the resistance as required. The higher the position, the more resistance. 700W power, 10 positions. Stable & Robust 640mmx635mm footprint Click 'n Ride The bike is fixed in the trainer easily by two simple clicks. Unique Dual Material Roller The roll that places the resistance on your rear wheel is made from two materials: a hardened steel sleeve with a soft core of elastogel. the steel sleeve prevents wear of the trainer, while the elastogel absorbs vibrations to reduce noise. Virtual Power Train with the Tacx Training app, Tacx Cycling app, Zwift or TrainerRoad on the basis of virtual power using the Tacx speed and cadence sensor! This transmits your speed and cadence wirelessly via ANT+ or Bluetooth Smart to your tablet or smartphone, so you can also use these popular training applications with a basic trainer. FEATURES Type of trainer: Basic trainer with magnetic brake Magnets: 2x8 Permanent ferrite magnets Transmission: Roller, 30 mm Electrical requirements: No mains voltage required Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: No Suitable bikes: Race, Tri & MTB , if necessary with axle skewer , 29? wheel with Tacx trainer tyre Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 700 Watt Max. incline: n.a. Simulation of descent: No Max. torque: 12.2 Nm Max. brake force: 36 N Flywheel: Actual of 1.25 kg Mass inertia: 8 kg (17.6 lbs) Calibration: n.a. Footprint (lxw): 640 × 635 mm (25.2 × 25.0 in) Height: 440 mm (17.3 in) Dimensions when folded: 610 × 420 × 250 mm (24.0 × 16.5 × 9.84 in) Weight: 8.40 kg (18.5 lbs) Article number: T2650 DATA OUTPUT AND CONTROL Wireless communication: None Control by: Handlebar resistance lever with 10 positions
Tacx Blue Matic Smart
$229.00
The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
Tacx Booster
$269.00
The Booster is the most powerful basic trainer and can generate high resistance at low speeds. If you set the handlebar resistance lever to a high position you have to exert a lot of force while advancing slowly, just like when you tackle a steep climb. This makes the Booster highly suitable for power based workouts. Manual Resistance Control The Booster is controlled by a lever on your steer, allowing you to set the resistance as required. The higher the position, the more resistance. 1050W power, 10 positions. Silence Boost The Booster is the only basic trainer with a closed resistance unit, highly reducing noise. Intervals & Power Workouts The powerful magnetic brake of the Booster enables intense interval sessions and power based workouts. Realistic Pedal Stroke The Booster features an actual flywheel which generates a realistic road feel. Stable & Robust 675mmx650mm footprint Multifunctional Front Wheel Support The Skyliner is a front wheel support that raises the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer. Click 'n Ride The bike is fixed in the trainer easily by two simple clicks. Unique Dual Material Roller The roll that places the resistance on your rear wheel is made from two materials: a hardened steel sleeve with a soft core of elsastogel. The steel sleeve prevents wear of the trainer, while the elastogel absorbs vibrations to reduce noise. Virtual Power Train with the Tacx Training app, Tacx Cycling app, Zwift or TrainerRoad on the basis of virtual power using the Tacx speed and cadence sensor! This transmits your speed and cadence wirelessly via ANT+ or Bluetooth Smart to your tablet or smartphone, so you can also use these popular training applications with a basic trainer. FEATURES Type of trainer: Basic trainer with magnetic brake Magnets: 2x8 Permanent ferrite magnets Transmission: Roller, 30 mm Electrical requirements: No mains voltage required Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: No Suitable bikes: Race, Tri & MTB , if necessary with axle skewer Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 1050 Watt Max. incline: n.a. Simulation of descent: No Max. torque: 17 Nm Max. brake force: 50 N Flywheel: Actual of 1,6 kg Mass inertia: 9.18 kg (20.2 lbs) Calibration: n.a. Footprint: (lxw) 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 8.53 kg (18.8 lbs) Article number: T2500 DATA OUTPUT AND CONTROL Wireless communication: None Control by: Handlebar resistance lever with 10 positions
Tacx FLUX 2 Smart
$899.00
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. - 16.8 lb flywheel makes for a more realistic training experience - Maximum resistance of 2000 watt - Incline simulation up to 16% - Power measurement accuracy of 2.5% - Compatible with long-cage derailleurs - Axle compatibility: 130mm, 135mm, 142x12mm and 148x12mm - Compatible with Bluetooth and ANT + FE-C FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm, 142mm & 148mm. Adapter for 135x10mm available. - Suitable bikes: Race, Tri & MTB - Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2000 Watt - Max. slope: 16% - Simulation of descent: No - Max. torque: 41Nm - Max. brake force: 120N - Flywheel: Actual of 7.6kg - Mass inertia: 31.2kg - Calibration: Spin down - Footprint (lxw): 670x642mm (26.4x25.3in) - Height: 460mm (18.1in) - Dimensions when folded: Not foldable - Weight: 23.6kg (52lbs) - Article number: T2980 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <2.5%
Tacx FLUX S Smart
$749.00
Tacx Flux S Smart Trainer is ideal for indoor training, Tacx has made slight but essential tweaks to accommodate a wider range of bikes.Built to accommodate bikes with long cage derailleurs, this new and improved model has redesigned internal mechanics to increase the accuracy of power measurement as you track your performance and progress. The internal mechanics of the FLUX S were redesigned to improve the power measurement and produce better power and more consistent power accuracy all within +/-3%. The Flux S also supports up to 1,500 watts and 10% slope. The internal upgrade and redesign also bring the noise and vibration down to make it almost silent. With its large flywheel, the FLUX S ensures a smooth ride feel and swift responsiveness which are key to replicate the experience of your outdoor rides. Tacx Flux S Smart Trainer is reliable, accurate, silent, and strong offering a good ride feel. Equipped with Smart technology, this indoor trainer allows you to use wireless technology to get a life like and responsive workout. The Tacx Flux S Smart Trainer is compatible with Zwift, and other 3rd party training apps. Features: · Type of trainer: Interactive Smart direct drive with electric brake · Magnets: 8 Permanent ferrite magnets & 8 electromagnets · Transmission: None · Electrical requirements: 110-240 Volts · Power indicator: None · Connection indicator (ANT/BT): 2 LEDs · Firmware upgradable: Yes · Suitable cassettes: Shimano & SRAM: 8 – 11 speed. Campagnolo, Sram XD and XD-R body sold separately · Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths are available · Suitable bikes: Race, Tri & MTB · Supplied with: Quick release for road bikes and mountain bikes (5mm), 1 month Tacx Premium software Specifications: · Max. power (40km/h): 1500 watt · Max. Incline: 10% · Simulation of descent: No · Max. torque: 22.1 Nm · Max. Brake force: 65 N · Flywheel: Actual of 7 kg · Mass inertia: 22.8kg · Calibration: Spin down · Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) · Height: 460 mm (18.1 in) · Dimensions when folded: Not foldable · Weight: 22.8kg (50.3 lbs) Data Output and Control: · Wireless communication: ANT+ FE-C, Bluetooth Smart open · Control by: Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna · Output: Speed, Cadence, Power · Read out on: Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+antenna · Accuracy: <3%
Tacx FLUX Smart
$749.00 $799.00 6% Off
The FLUX is a compact and realistic interactive direct drive trainer, with inner parts carefully selected to minimize sound levels. It combines FLUX Tacx direct drive technology with an electro brake in order to offer an accessible Smart and interactive direct drive. Simply remove your bike's rear wheel, mount the bike directly on the trainer, step on and start training. The Flux has been designed to enable you to really push your limits, especially when standing on the pedals. It offers the truest simulation of a pedal stroke as it is equipped with the heaviest flywheel to date - 7kg. The swift response of the Smart electronics and the flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. This trainer connects wirelessly to smartphones and tablets and knows the ANT+ FE-C protocol, enabling you to train with Tacx apps, as well as third-party apps like Zwift and TrainerRoad. You can also train stand-alone; if you do not connect the trainer it will simulate a flat road. It shows when it is connected to the mains and to a device over ANT+ or Bluetooth by an LED light on the side. The software receives the speed, cadence, and power from the trainer and controls the brake. With the Tacx Utility app, you can always benefit from the latest firmware for the Tacx trainer and check the connection with other devices. When an update is available, you receive a notification and you can decide whether you want to update your trainer. FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Various Shimano, SRAM & Campagnolo cassettes - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available - Suitable bikes: Race, Tri & MTB, Not suitable for a long cage rear derailleur - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1500 Watt - Max. slope: 10% - Simulation of descent: No - Max. torque: 22.1Nm - Max. brake force: 65N - Flywheel: Actual of 7kg - Mass inertia: 22.8kg - Calibration: Spin down - Footprint (lxw): 670×650mm (26.4×25.6in) - Height: 465mm (18.3in) - Dimensions when folded: Not foldable - Weight: 16kg (35.3lbs) - Article number: T2900 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <3%
Tacx Flow Smart
$369.99
The Flow Smart is an interactive Smart trainer with an electro brake. It offers intensive training sessions with a wide range of possibilities thanks to its open communication protocol. The electro brake makes this trainer highly accessible and ideal for keeping in tip-top condition during the winter. The Flow features an electro brake, capable of generating s a realistic cycling feeling while offering all interactive functionalities. Tacx Smart trainers use the Bluetooth Smart and ANT+ FE-C protocol for communication which allows them to be controlled by third-party software. The software receives the speed, cadence and power from the trainer and controls the brake. Click on more information for an explanation of the compatibility and functions of each software package. FEATURES - Type of trainer: Interactive Smart trainer with electric brake - Magnets: 6 Magnets - Transmission: Roller, 30 mm - Electrical requirements: 110-240 Volt - Power indicator (Wattage): None - Connection indicator (ANT/BT): None - Firmware upgradable: Yes - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer , 29" wheel with Tacx trainer tyre - Supplied with: Front wheel support, Quick release for racing bikes and mountain bikes (5 mm) SPECIFICATIONS - Max. power (40 km/h): 800 Watt - Max. slope: 6% - Simulation of descent: No - Max. torque: 15.3Nm - Max. brake force: 45N - Flywheel: Actual, 1.65kg - Flywheel effect: 11.8kg - Calibration: Spin down DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C , Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone - Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <10%
Tacx Flow Smart
$369.99
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%
Tacx Flux S Smart
$749.99
Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion. - Measure your power within 3% error tolerance - Next-to-silent direct drive trainer lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts - Sturdy design easily allows for riding full-out and standing on the pedals FEATURES Type of trainer: Interactive Smart direct drive with electric brake Magnets: 8 Permanent ferrite magnets & 8 electromagnets Transmission: None Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available. Suitable bikes: Race, Tri, & MTB Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 1500 Watt Max. incline: 10% Simulation of descent: No Max. torque: 22.1 Nm Max. brake force: 65 N Flywheel: 7kg Mass inertia: 22.8kg (50.3 lbs) Calibration: Spin down Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) Height: 460mm (18.1 in) Weight: 22.8kg (50.3lbs) Article number: T2900S DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <3%
Tacx Flux Smart with 10-Speed Cassette
$749.00 $829.00 10% Off
Includes Shimano or 10-Speed Cassette The FLUX is a compact and realistic interactive direct drive and is maintenance-free. The swift response of the Smart electronics and the 7kg flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. Tacx Smart trainers use the Bluetooth Smart and ANT+ FE-C protocol for communication which allows them to be controlled by third-party software. The software receives the speed, cadence and power from the trainer and controls the brake. Click on more information for an explanation of the compatibility and functions of each software package. - Direct drive trainer with an electro brake - Stable frame design - Bluetooth and ANT+ FE-C communication capable - Maximum resistance of 1500 watt - Incline simulation up to 10% - 15 lbs flywheel - Measure speed, cadence and power FEATURES: - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator (Wattage): None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Supplied with: Quick release for racing bikes and mountain bikes (5 mm) - Suitable bikes: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available , Not suitable for a long cage rear derailleur - Suitable cassettes: various Shimano, SRAM & Campagnolo cassettes SPECIFICATIONS: - Max. power (40 km/h) : 1500 Watt - Max. slope: 10% - Simulation of descent :No - Max. torque: 22.1Nm - Max. brake force: 65 N - Flywheel: Actual, 7 kg - Flywheel effect: 22.8kg - Calibration: Spin down - Footprint (lxw): 670x650mm (26.4x25.6 in) - Height: 465 mm (18.3 in) - Dimensions when folded: Not foldable - Weight: 16 kg (35.3 lbs) - Article number: T2900 DATA OUTPUT AND CONTROL: - Wireless communication: ANT+ FE-C , Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone - Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5% A bike with a long cage derailleur won't fit the FLUX as the maximum distance between the centre of the cassette and top of the FLUX's leg is 200 mm (as shown in the image below). When using a long cage derailleur in the highest gear, it'll hit the leg. See the third image for visual explaination.
Tacx Flux Smart with 11-Speed Cassette
$779.00 $829.00 6% Off
Includes Shimano or SRAM 11-Speed 11-28T Cassette The FLUX is a compact and realistic interactive direct drive and is maintenance-free. The swift response of the Smart electronics and the 7kg flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. Tacx Smart trainers use the Bluetooth Smart and ANT+ FE-C protocol for communication which allows them to be controlled by third-party software. The software receives the speed, cadence and power from the trainer and controls the brake. Click on more information for an explanation of the compatibility and functions of each software package. - Direct drive trainer with an electro brake - Stable frame design - Bluetooth and ANT+ FE-C communication capable - Maximum resistance of 1500 watt - Incline simulation up to 10% - 15 lbs flywheel - Measure speed, cadence and power FEATURES: - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator (Wattage): None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Supplied with: Quick release for racing bikes and mountain bikes (5 mm) - Suitable bikes: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available , Not suitable for a long cage rear derailleur - Suitable cassettes: various Shimano, SRAM & Campagnolo cassettes SPECIFICATIONS: - Max. power (40 km/h) : 1500 Watt - Max. slope: 10% - Simulation of descent :No - Max. torque: 22.1Nm - Max. brake force: 65 N - Flywheel: Actual, 7 kg - Flywheel effect: 22.8kg - Calibration: Spin down - Footprint (lxw): 670x650mm (26.4x25.6 in) - Height: 465 mm (18.3 in) - Dimensions when folded: Not foldable - Weight: 16 kg (35.3 lbs) - Article number: T2900 DATA OUTPUT AND CONTROL: - Wireless communication: ANT+ FE-C , Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone - Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5% A bike with a long cage derailleur won't fit the FLUX as the maximum distance between the centre of the cassette and top of the FLUX's leg is 200 mm (as shown in the image below). When using a long cage derailleur in the highest gear, it'll hit the leg. See the third image for visual explaination.
Tacx Flux Smart with 11-Speed Cassette and 3-Month Zwift Membership
$799.00 $950.00 16% Off
Includes Shimano or 11-Speed 11-28T Cassette and 3-Month Zwift Membership The FLUX is a compact and realistic interactive direct drive and is maintenance-free. The swift response of the Smart electronics and the 7kg flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. Tacx Smart trainers use the Bluetooth Smart and ANT+ FE-C protocol for communication which allows them to be controlled by third-party software. The software receives the speed, cadence and power from the trainer and controls the brake. Click on more information for an explanation of the compatibility and functions of each software package. - Direct drive trainer with an electro brake - Stable frame design - Bluetooth and ANT+ FE-C communication capable - Maximum resistance of 1500 watt - Incline simulation up to 10% - 15 lbs flywheel - Measure speed, cadence and power FEATURES: - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator (Wattage): None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Supplied with: Quick release for racing bikes and mountain bikes (5 mm) - Suitable bikes: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available , Not suitable for a long cage rear derailleur - Suitable cassettes: various Shimano, SRAM & Campagnolo cassettes SPECIFICATIONS: - Max. power (40 km/h) : 1500 Watt - Max. slope: 10% - Simulation of descent :No - Max. torque: 22.1Nm - Max. brake force: 65 N - Flywheel: Actual, 7 kg - Flywheel effect: 22.8kg - Calibration: Spin down - Footprint (lxw): 670x650mm (26.4x25.6 in) - Height: 465 mm (18.3 in) - Dimensions when folded: Not foldable - Weight: 16 kg (35.3 lbs) - Article number: T2900 DATA OUTPUT AND CONTROL: - Wireless communication: ANT+ FE-C , Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone - Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5% A bike with a long cage derailleur won't fit the FLUX as the maximum distance between the centre of the cassette and top of the FLUX's leg is 200 mm (as shown in the image below). When using a long cage derailleur in the highest gear, it'll hit the leg. See the third image for visual explaination.
Tacx Flux Smart with 3-Month Zwift Membership
$779.00 $829.00 6% Off
Includes 3-month membership to Zwift interactive online indoor training service The FLUX is a compact and realistic interactive direct drive and is maintenance-free. The swift response of the Smart electronics and the 7kg flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. Tacx Smart trainers use the Bluetooth Smart and ANT+ FE-C protocol for communication which allows them to be controlled by third-party software. The software receives the speed, cadence and power from the trainer and controls the brake. Click on more information for an explanation of the compatibility and functions of each software package. - Direct drive trainer with an electro brake - Stable frame design - Bluetooth and ANT+ FE-C communication capable - Maximum resistance of 1500 watt - Incline simulation up to 10% - 15 lbs flywheel - Measure speed, cadence and power FEATURES: - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator (Wattage): None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Supplied with: Quick release for racing bikes and mountain bikes (5 mm) - Suitable bikes: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available , Not suitable for a long cage rear derailleur - Suitable cassettes: various Shimano, SRAM & Campagnolo cassettes SPECIFICATIONS: - Max. power (40 km/h) : 1500 Watt - Max. slope: 10% - Simulation of descent :No - Max. torque: 22.1Nm - Max. brake force: 65 N - Flywheel: Actual, 7 kg - Flywheel effect: 22.8kg - Calibration: Spin down - Footprint (lxw): 670x650mm (26.4x25.6 in) - Height: 465 mm (18.3 in) - Dimensions when folded: Not foldable - Weight: 16 kg (35.3 lbs) - Article number: T2900 DATA OUTPUT AND CONTROL: - Wireless communication: ANT+ FE-C , Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone - Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5% A bike with a long cage derailleur won't fit the FLUX as the maximum distance between the centre of the cassette and top of the FLUX's leg is 200 mm (as shown in the image below). When using a long cage derailleur in the highest gear, it'll hit the leg. See the third image for visual explaination.
Tacx I-Genius Multiplayer Smart
$659.00 $1,199.00 45% Off
Just like the Genius Smart, the i-Genius Multiplayer Smart uses the most advanced resistance unit and software which analyses performance and simulates bike courses very accurately. The wireless motor brake converts the properties of the terrain into resistance on the bike, in a highly realistic manner. The bike route is displayed on your screen. The motor brake is able to apply a maximum power of 1500 W to the back wheel and will speed up during a descent. The slopes simulated are realistic up to 20% and down to -5% for descents. The i-Genius Multiplayer comes with the Upgrade Smart to connect to a Windows PC and use the Tacx Trainer software 4, Advanced and a BlackTrack to allow free steering in the TTS 4. The i-Genius Multiplayer Smart communicates via ANT+ and Bluetooth Smart for convenient training sessions using your smartphone or tablet. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the i-Genius Multiplayer Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. -Software Tacx apps and TTS 4, Advanced & Third party apps and software -Operation Automatic -Resistance unit Motor -Realistic slope 20% 1 -Descent simulation To -5% -Max brake power (10 sec.) 1500 Watt -Sprint power (1 min.) 1200 Watt -Mass inertia 125 kg 2 -Suitable for all bikes, if necessary with axle skewers or nuts -Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Tacx NEO 2 Smart
$1,249.00 $1,399.99 11% Off
Meet The NEO 2 Smart, the pinnacle of indoor bike training. In addition to immersive features that truly make you feel like you’re riding outdoors, this new direct drive also features pedal stroke analysis and a number of other refinements that make it one of the most quiet, realistic and accurate bike trainers available. - Next-to-silent smart bike trainer with improved accuracy within 1%; measures power and cadence - Enables accurate pedal stroke analysis with left and right balance and power distribution - Dynamic inertia compensates for weight and other factors to ensure a realistic and smooth ride feel - Unique motor design allows for a maximum sprint resistance of 2,200 watts and simulates climbs up to a 25% incline - Only bike trainer with road feel, a feature that lets you experience the sensation of different road surfaces, such as cobblestone and gravel FEATURES Type of trainer: Interactive Smart direct drive with motor brake Magnets: 32 Neodymium magnets Transmission: None Electrical requirements: 110-240 Volt , Mains power optional Power indicator: Multicolor LED , Spot on floor Connection indicator: (ANT/BT) 2 LEDs Firmware upgradable: Yes Suitable cassettes: >2018: Shimano & SRAM: 8 - 11 speed; <2018: Various Shimano, SRAM & Campagnolo cassettes. >2018 Campagnolo body sold separately. Suitable axles: Road 130mm, MTB 135mm. Adapters for other widths available Supplied with: Front wheel support, Quick release for road bikes and QR-fork mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 2200 Watt Max. incline: 25% Simulation of descent: Yes Max. torque: 85 Nm Max. brake force: 250 N Flywheel: Virtual Mass inertia: Variable to 125kg (275.6lbs) Calibration: No calibration required Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) Height: 550 mm (21.7 in) Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) Weight: 21.5 kg (47.3 lbs) Article number: T2800 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone, Tablet Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <1%
Tacx Neo 2 Smart Indoor Cycling Trainer
$1,239.00 $1,399.00 11% Off
The pinnacle of indoor bike training, the Tacx NEO Smart, is made even better. On top of immersive features like Road feel, Dynamic Inertia and Descent simulation, this new direct drive also features Pedal stroke analysis. It is without question the most silent, realistic and accurate bike trainer available. FEATURES - Type of trainer: Interactive Smart direct drive with motor brake - Magnets: 32 Neodymium magnets - Transmission: None - Electrical requirements: 110-240 Volt, Mains power optional - Power indicator: Multicolour LED, Spot on floor - Connection indicator: (ANT/BT) 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 - 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available. - Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm & 148x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2200 Watt - Max. incline: 25% - Simulation of descent: Yes - Max. torque: 85 Nm - Max. brake force: 250 N - Flywheel: Virtual - Mass inertia: Variable to 125kg (275.6lbs) - Calibration: No calibration required - Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) - Height: 550 mm (21.7 in) - Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) - Weight: 21.5 kg (47.3 lbs) Article number T2850 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna - Output: Speed, Cadence, Power - Read out on: Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+ antenna Accuracy <1%
Tacx Neo 2 Smart Indoor Cycling Trainer Bundle
$1,269.00 - $1,499.00 $1,449.00 - $1,499.00 Up to 12% Off
The pinnacle of indoor bike training, the Tacx NEO Smart, is made even better. On top of immersive features like Road feel, Dynamic Inertia and Descent simulation, this new direct drive also features Pedal stroke analysis. It is without question the most silent, realistic and accurate bike trainer available. Cassette does not ship installed on trainer. FEATURES - Type of trainer: Interactive Smart direct drive with motor brake - Magnets: 32 Neodymium magnets - Transmission: None - Electrical requirements: 110-240 Volt, Mains power optional - Power indicator: Multicolour LED, Spot on floor - Connection indicator: (ANT/BT) 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 - 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available. - Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm & 148x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2200 Watt - Max. incline: 25% - Simulation of descent: Yes - Max. torque: 85 Nm - Max. brake force: 250 N - Flywheel: Virtual - Mass inertia: Variable to 125kg (275.6lbs) - Calibration: No calibration required - Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) - Height: 550 mm (21.7 in) - Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) - Weight: 21.5 kg (47.3 lbs) Article number T2850 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna - Output: Speed, Cadence, Power - Read out on: Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+ antenna Accuracy <1%
Tacx Neo 2T Smart Indoor Cycling Trainer
$1,399.99
The Neo 2T has improved performance, better sprints and high-end pedaling analysis making a leading bike trainer even better. Quiet, vibration free operation, better climbing, realistic feel and pedaling analysis, the Neo 2T provides an optimal indoor workout. You will train with accurate metrics, tackling climbs and challenging other riders all from the comfort of your own home. The Neo 2T has an improved beefed up motor and magnets to better handle sudden changes in speed whether you are sprinting or tackling rough climbs with a realistic feel of outdoor cycling. The Road Feel feature replicates a variety of road surfaces, so you can ride on cobblestone, smooth asphalt or gravel all while never leaving your home. Neo 2T simulates grades of up to 25% and the Descent Feature kicks in a motor assist to replicate the exhilaration of blazing downhill. You can fine tune your pedal stroke utilizing ANT+ or bluetooth connectivity with a variety of third-party applications by relaying info through every stroke of the pedal. You can use this data to optimize the power your legs provide to the pedals, giving you the edge on long rides and climbs. The Neo 2T supports Bluetooth and ANT+, allowing connection to an array of compatible smartphones, tablets, laptops, bike computers and sports watches. You can choose from a variety of Tacx workouts and videos when you are ready to hit the virtual road. The Neo 2T trainer outputs accurate power, cadence and speed data, plus provides pedaling analysis so you can improve your technique. Neo 2T is compatible with Zwift, TrainerRoad, and all other popular training apps. FEATURES: · Type of trainer: Interactive Smart direct drive with motor brake · Magnets: 32 Neodymium magnets · Transmission: None · Electrical requirements: 110-240 Volt , Mains power optional · Power indicator : Multicolor LED , Spot on floor · Connection indicator (ANT/BT): 2 LEDs · Firmware upgradeable: Yes · Suitable cassettes: Shimano & SRAM: 8-12 speed. Campagnolo, SRAM XD and XD-R body sold separately. Not suitable for Specialized SCS system · Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148mm. Adapter for 135 x 10 mm available. · Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm & 148x12mm , 1 month Tacx Premium software SPECIFICATIONS: · Max. power (40 km/h): 2200 Watt · Max. incline: 25% · Simulation of descent: Yes · Max. torque: 85 Nm · Max. brake force: 250 N · Flywheel: Virtual · Mass inertia: Variable to 125kg (275.6lbs) · Calibration: No calibration required · Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) · Height: 550 mm (21.7 in) · Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) · Weight: 21.5 kg (47.3 lbs) · Article number: T2875 DATA OUTPUT AND CONTROL: · Wireless communication: ANT+ FE-C, Bluetooth Smart open · Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone , Tablet · Output: Cadence, Power, Speed · Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet · Accuracy: <1%
Tacx Neo 2T Smart Trainer Bundle
$1,425.00 - $1,495.99 $1,425.00 - $1,499.00 Up to 1% Off
The Neo 2T has improved performance, better sprints and high-end pedaling analysis making a leading bike trainer even better. Quiet, vibration free operation, better climbing, realistic feel and pedaling analysis, the Neo 2T provides an optimal indoor workout. You will train with accurate metrics, tackling climbs and challenging other riders all from the comfort of your own home. The Neo 2T has an improved beefed up motor and magnets to better handle sudden changes in speed whether you are sprinting or tackling rough climbs with a realistic feel of outdoor cycling. The Road Feel feature replicates a variety of road surfaces, so you can ride on cobblestone, smooth asphalt or gravel all while never leaving your home. Neo 2T simulates grades of up to 25% and the Descent Feature kicks in a motor assist to replicate the exhilaration of blazing downhill. You can fine tune your pedal stroke utilizing ANT+ or bluetooth connectivity with a variety of third-party applications by relaying info through every stroke of the pedal. You can use this data to optimize the power your legs provide to the pedals, giving you the edge on long rides and climbs. The Neo 2T supports Bluetooth and ANT+, allowing connection to an array of compatible smartphones, tablets, laptops, bike computers and sports watches. You can choose from a variety of Tacx workouts and videos when you are ready to hit the virtual road. The Neo 2T trainer outputs accurate power, cadence and speed data, plus provides pedaling analysis so you can improve your technique. Neo 2T is compatible with Zwift, TrainerRoad, and all other popular training apps. FEATURES: · Type of trainer: Interactive Smart direct drive with motor brake · Magnets: 32 Neodymium magnets · Transmission: None · Electrical requirements: 110-240 Volt , Mains power optional · Power indicator : Multicolor LED , Spot on floor · Connection indicator (ANT/BT): 2 LEDs · Firmware upgradeable: Yes · Suitable cassettes: Shimano & SRAM: 8-12 speed. Campagnolo, SRAM XD and XD-R body sold separately. Not suitable for Specialized SCS system · Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148mm. Adapter for 135 x 10 mm available. · Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm & 148x12mm , 1 month Tacx Premium software SPECIFICATIONS: · Max. power (40 km/h): 2200 Watt · Max. incline: 25% · Simulation of descent: Yes · Max. torque: 85 Nm · Max. brake force: 250 N · Flywheel: Virtual · Mass inertia: Variable to 125kg (275.6lbs) · Calibration: No calibration required · Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) · Height: 550 mm (21.7 in) · Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) · Weight: 21.5 kg (47.3 lbs) · Article number: T2875 DATA OUTPUT AND CONTROL: · Wireless communication: ANT+ FE-C, Bluetooth Smart open · Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone , Tablet · Output: Cadence, Power, Speed · Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet · Accuracy: <1%
Tacx Neo Bike Smart
$3,199.99
New Orders Shipping Late January 2020 A benchmark-setting trainer, the Tacx Neo Bike is solid and quiet, with accurate power measurement (accuracy: ±1%) with simple third-party software connectivity. The Tacx Neo Bike is a premium option for when the weather is bad, or you want to train more efficiently from the comfort of your own home. The Neo Bike powers up to 2200 watts and inclines up to 25% making this a great trainer option for even the most powerful sprinters. You even get the real feel experience of riding outdoors, with dynamic inertia, and road and gear feel options simulating vibrations of different road patterns. The Neo bike is fully adjustable to match the geometry of road and tri bikes. The Tacx Neo Bike gives you the ability to customize the gear ratios to your preferred setup with virtual gears that work instantly. With built-in air fans, you’ll be able to train harder in more comfort. The Tacx Neo Bike comes with a 4.5 inch display that allows you to clearly read all your stats, and a phone and tablet holder so you can connect to your apps or watch your favorite program while you train. The Neo Bike is a great addition to enhance your indoor workout. Features: · Type of trainer: Smart bike with direct drive and motor brake · Magnets: 32 Neodymium magnets · Transmission: None · Electrical requirements: 110-240 Volt. Mains power optional · Connection indicator [ANT/BT]: 2 LEDs · Firmware upgradable: Yes · Gear ratio: Chainring set-up; up to 3 sprockets, adjustable between 22 and 53, Rear cassette; up to 12 sprockets, teeth per sprocket adjustable between 11 and 40 · Q-factor: 147mm · Supplied with: Fans, Tablet mount, Saddle, Handlebars,2 USB chargers (front), Sweat cover, Ciro bottle cage, Bottle, Tacx towel, 1 month Tacx Premium software, Pedals and tablet not included Specifications: · Max. power [40km/h]: 2200 watts · Max. incline: 25% · Simulation of descent: Yes · Max. torque: 85Nm · Max. brake force: 250N · Flywheel: Virtual · Mass inertia: Variable to 125kg [275.6 lbs] · Calibration No calibration required · Footprint [lxw]: 1390 x 750mm [54.7 x 29.5 inches] · Height: 1170mm [46.1 inches] · Dimensions when folded: Not foldable · Weight: 50kg [110 lbs] Data Output and Control: · Wireless communication: ANT+ FE-C, Bluetooth Smart open · Control by: ANT + FE-C bike computers, Connect to computer via ANT + antenna, Smartphone, Stand alone, Tablet · Output: Cadence, Power, Speed · Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet · Accuracy: <1%
Tacx Neo Smart
$1,199.00 $1,299.00 8% Off
The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
Tacx Neo Smart Trainer with 10-Speed Cassette
Includes 10-Speed Cassette The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
Tacx Neo Smart Trainer with 11-Speed Cassette and 3-Month Zwift Membership
$1,149.00 $1,279.00 10% Off
Includes 3-month membership to Zwift interactive online indoor training service and 11-Speed Cassette The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
Tacx Neo Smart Trainer with 3-Month Zwift Membership
Includes 3-month membership to Zwift interactive online indoor training service The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
Tacx Satori Smart
$329.00 $399.00 18% Off
The Satori Smart is the only manually controlled trainer which measures speed, power and cadence. The resistance of this wheel-on trainer is changed manually with 10 handlebar positions. And it connects to most popular training apps, like Zwift, Tacx and TrainerRoad. Speed, Power & Cadence This unique manual Smart trainer is one of a kind. The patented measuring technology in the Satori Smart enables this bike trainer to accurately measure speed, power, and cadence. Manually Adjusted Resistance The resistance of the Satori Smart can be easily changed manually with 10 handlebar positions. Ranging from 100 Watts to 950 Watts, this trainer is the perfect training companion for workouts with high power intervals. Train Anywhere Powered by two AA batteries the Satori Smart is a trainer you can setup anywhere you like. No need for an external power source. The batteries will last for approximately a year. Securely Locked In Tacx wheel-on trainers are easy to set up. With two easy clicks your bike is securely locked in the trainer frame, making sure that your bike is safely fixed and doesn't go anywhere. Dual Material Roll The roll is made from two materials: a hardened steel sleeve with a soft core elastogel. The steel sleeve prevents wear of the trainer, while the elsastogel absorbs vibrations to reduce noise. Skyliner As A Handle The Skyliner not only serves as a front wheel support for a natural cycling position, but can also be used as a handle for your trainer. Stable Frame Designed with a large footprint and strong materials, this bike trainer is able to withstand the most intense training sessions. FEATURES Type of trainer: Basic Smart trainer with magnetic brake Magnets: 1 Neodymium magnet Transmission: Roller, 30 mm Electrical requirements: 2x AA battery Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri & MTB , if necessary with axle skewer Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 950 Watt Max. incline: n.a. Simulation of descent: No Max. torque: 16.3 Nm Max. brake force: 48 N Flywheel: Actual of 1,6 kg Mass inertia: 16.9 kg (37.3 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 7.75 kg (17.1 lbs) Article number: T2400 DATA OUTPUT AND CONTROL Wireless communication: ANT+ & Bluetooth Control by: Handlebar resistance lever with 10 positions Output: Cadence , Power , Speed Read out on: Bike computer , Computer with ANT+ antenna , Smartphone , Sports watch , Tablet Accuracy: <10%
Tacx Satori Smart with 3-Month Zwift Membership
$359.00 $444.00 19% Off
Includes 3-month membership to Zwift interactive online indoor training service The Satori Smart trainer uses complex technology in a user-friendly fashion. The resistance is set manually with the handlebar resistance lever offering 10 different resistance positons, from very easy to very strong. The Satori Smart can communicate via both ANT+ as well as Bluetooth® Smart. In the resistance unit an accurate measurement of your speed, cadence and power is performed. This data is then shown on the screen your using, whether this is a tablet, smartphone, sportwatch, or something else. During or after a training session you, or your coach, can thus monitor your performance closely. Since the Satori is not hooked up to the power net, you can use this trainer anytime and anywhere, also when you don’t have your smartphone with you. Software Tacx apps & Third party apps. PC software via upgrade. Operation Handlebar resistance lever Resistance unit Magnetic Realistic slope 10 positions Descent simulation No Max brake power (10 sec.) 950 Watt Sprint power (1 min.) 800 Watt Mass inertia 16.93 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter 26"- 29" and 700c; 29" with trainer tyre
Page 1 of 1