Lubes/Cleaners

Effeciently breaksdown grease and contamination within bearings Easy to apply with included pippette Designed to clean without harsh solvents Non-toxic and Biodegradable formula is environmentally friendly and safe

Designed to suit the maintenance of CeramicSpeed Bearings, the CeramicSpeed All Round Grease maximizes your bearings' lifetime and performance. This type of grease is a low-to-medium viscosity lubricant and works as the best compromise between friction influence and lifetime. We recommend it for optimal use in dry and sunny weather conditions, where no or very little contamination threatens the bearing. The application covers mostly road riding conditions; however, it can be used off-road in the same weather settings, on all types of CeramicSpeed Bearings. When lubricating your bearings, we recommend a fill rate of 60-80%. - The CeramicSpeed All Round Grease comes in a 10ml syringe - For use in CeramicSpeed Wheel Bearings and Bottom Bracket Bearings - Can be used for added durability in pulley wheels when used in adverse weather conditions - 5,000-10,000km or 3,000-5,000 mile average lifespan in clean conditions - 1,000-3,000km or 600-1,800 mile average lifespan in wet and harsh conditions

We focused on maximizing your performance and the longevity of your CeramicSpeed Pulley Wheels when we designed the special oil for pulley maintenance. Remember to add oil on the outside of the bearing seal after riding in wet conditions or washing your bike. If you are riding in harsh and wet conditions, we recommend that you choose the All Round Grease instead and grease your bearings from time to time. When using the oil for maintenance, the recommended dose is 1-2 drops. Remember that the OSPW System has two lubrication points on the back cage plate to facilitate this process.

- Designed to meet the needs of CeramicSpeed bearings. Maximize performance with the best maintenance products - All Round Grease: low to medium viscosity. Optimal use in dry and sunny weather, very little contamination threat. Recommended fill rate: 60-80% LongLife Grease: medium viscosity with slightly higher friction than All Round Grease. Use in humid environments and the worst riding conditions. Recommended fill rate: 70-100% - TT + Track Grease: lowest possible friction with Dynamic Viscosity Transformation technology. Recommended fill rate Road: 25-30%, recommended fill rate Track: 15-20% - Pulley Wheel Oil: specialty oil for pulley maintenance. 1-2 drops on bearing seals after riding in wet conditions or washing the bike

UFO Bearings Cleaner was developed specifically to clean the types of grease and common contamination found in cycling bearings. As a non-toxic, biodegradable formula, you can clean your bearings with ease and peace of mind without harsh solvents or hazardous leftovers.

UFO Bike Wash is an ecofriendly foaming bike soap that is tested and approved for all bicycle surfaces. This bike wash is safe for indoor and outdoor use and features no perfumes or added scents.

UFO chain lubricant hardens to a 100% dry coating to protect against unwanted contaminants, which results in a quieter drivetrain, reduced friction and component wear. - Tested in real-world conditions to quantitatively create the most efficient mode of chain lubrication to date - The improved performance and reduced friction can save up to 5 watts for increased efficiency - *Bottle, chain and air temperature should be at or above 68F for proper application and performance - *Additional instructions and recommended application steps are included in box - 300 km per coating - More than 35 coatings per bottle - Non toxic, non-flammable, bio-degradable formula - Increased temperature stability - apply between 5-35OC / 41-95OF

This eco-friendly Drivetrain Cleaner thoroughly removes grease and grime from all drivetrain components. The unique properties dissolve wax from internal rollers, and all surfaces of chain links. This is a non-toxic and biodegradable formula – environmentally friendly and safe.

UFO Drip All conditions: Ceramicspeed's acclaimed UFO Drip Chain Coating has been updated to be known as UFO Drip All Conditions. Now, in a new, smaller bottle size and an optimized formula that has a crisp white appearance while applying, that virtually disappears once fully dry. UFO Drip Wet conditions: For those riding in consistently wet conditions, Ceramicspeed's new UFO Drip for Wet Conditions has been uniquely developed to maximize the benefits of a wax chain lubricant, while resisting deterioration through wet riding conditions. UFO Drip Indoor: To complete the UFO Drip family, Ceramicspeed has developed UFO Drip for Indoor. Wax chain coatings have multiple benefits, but also tend to shed excess surface wax after initial application. With UFO Drip for Indoor, the balance of wax to friction modifiers has been adjusted to maximize efficiency in clean conditions with minimal surface buildup.

Purposely designed oil for the optimal Pulley Wheel maintanence and protection.

The CeramicSpeed UFO Clean Drivetrain thoroughly removes grease and grime from all drivetrain components. The unique properties dissolve wax from internal rollers and all surfaces of chain links. UFO Clean Drivetrain is designed and formulated to clean and prepare chains for wax coatings, using the same formula that we at CeramicSpeed use to prepare our UFO Chains. This is a non-toxic and biodegradable formula—environmentally friendly and safe. - Non-toxic and biodegradable formula - Thoroughly removes grease and grime from all drivetrain components - Developed and bottled in Denmark - Avoid applying directly to disc brake pads - Contains 1 liter - Not to be used as a bearing cleaner - Safe for carbon, glossy- or matte-painted, and anodized surfaces