Your SEO optimized title

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

Pedro's Pig Pen - Drivetrain Maintenance Kit
$39.99
Quickly and easily overhaul your entire drivetrain! Free the Chain Pig from his pen and watch him devour chain grime as only a pig can! The Pig Pen Drivetrain Maintenance Kit includes everything you need: Chain Pig hands-free chain cleaner, gear brush, 4oz Pig Juice degreaser, and 4oz Chainj chain lube.
General Tools Scratch Awl
$10.72
- Great for re-opening cut housing and for marking cuts - Hardwood fluted handle offers a comfortable grip - Alloy steel blade securely mated to steel ferrule and cap - 6-1/2" overall length (3-1/2" pick-blade)
Pedro's Pig Pen II Drivetrain Maintenance Kit
$41.99
Quickly and easily overhaul your entire drivetrain! Free the Chain Pig from his pen and watch him devour chain grime as only a pig can! The Pig Pen II Drivetrain Maintenance Kit includes everything you need: New and improved Chain Pig II hands-free chain cleaner, gear brush, 4oz Pig Juice degreaser, and 4oz XDry chain lube. Pig Juice: Developed specifically for Pedro's grime-devouring Chain Pig chain cleaner, Pig Juice is an impressively effective and economical degreaser/cleaner that makes bicycle drivetrain cleaning quick, easy, and safe for anyone from novice to professional. Pig Juice features an advanced pre-activated formula that quickly penetrates & loosens, removing oils, soils, and grime with less scrubbing & rinsing, and leaves spotless residue-free parts. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, fragrance-free, dye-free, solvent-free, plant-derived, and zero-VOC. X Dry: Formulated with Pedro's exclusive CleanTech Chemistry, X Dry uses advanced polymer technology that drys to a unique semi-fluid film and provides clean and long-lasting performance in dry to mixed conditions. Noticeably elevates efficiency, runs quiet, reduces wear, and repels water and grime. Gear Brush: Perfect for degreasing cassette, derailleur pulleys, and chainrings. - Includes hands-free chain cleaner, gear brush, 4 oz degreaaser and 4 oz chain lube
Wheelsmith Spoke Sizing Tools
$40.00
- Professional tools to correctly size spokes for wheelbuilding
Hayes Brake Tools
$42.00
- This set of tools is essential for servicing a Stroker Ace caliper
General Tools Feeler Gauge Set
$14.22
- 26-leaf feeler gauge set (great for disc brake pad setting) - Both SAE and Metric measurements listed on each blade - Sizes: .0015, .002, .0025, .003, .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, .025" - Metric range: .037mm to .635mm
General Tools Hand Reamer/Countersink Tool
$16.66
- Great reamer for close-quarter jobs - 3/4" five-flute tool steel cutter for quick and easy reaming - Long run-out not needed (as with long-taper designs) - Heavy-duty, ergonomically designed handle (5/1/8" OL)
General Tools Jeweler Screwdriver Set
$11.46
- Great for derailleur limit screws, master-cylinder bleed screws and other precision operations - Contains: (1) handle/clamp, (4) flat-blade, (1) crosshead - Comes in plastic self-stand case with clear plastic lid
General Tools Metric/SAE Precision Caliper
$83.90
- Shop-quality stainless steel construction vernier caliper - Scales read in Metric and English (SAE) for comparison - Measures inside, outside, depth, and step dimensions - Extra long design with depth gauge and auto thumblock - Accurate to .05mm with a 150mm capacity - Permanent (black) graduations with conversion table on back of tool, plastic case and instructions included
General Tools Precision Needle File Set
$14.04
- Precision, Swiss pattern needle file set - Knurled aluminum 5-1/2" handle with file-lock tip - Three most common files: flat, round, triangular - 8-1/2" overall length (file + handle)
General Tools Precision Oiler Pen
$16.90
- Smooth actuator provides accurate control and delivery rate - Generous reservoir for liquid lubricants - All aluminum construction with steel pen/pocket clip - Protective screw-on cover prevents leakage - Overall length: 5-5/8"
General Tools Precision Swivel-Tip Screwdriver
$14.76
- Great for derailleur limit screws, master-cylinder bleed screws and other precision operations - Fingertip swivel head for greater control and accuracy - Chrome vanadium screwdriver blades held in a reversible carrier-tip - Contains: (1) swivel-tip screwdriver base; (1) 1/8"-5/64" double-ended flat-blade; and (1) #0-#000 double-ended crosshead blade
General Tools Probe/Pick Set
$14.96
- Designed for probing, cleaning, picking, and marking - Three piece includes: 45 degree, 90 degree, and hook tips - Tips constructed from high carbon steel - Extra long knurled aluminum handle/body - 6-1/2" overall length
General Tools Replacement Cutting Wheel
$7.64
- Classic design with anti-friction, flare groove rollers for precision cuts - Replaceable, hardened alloy-steel cutting wheel - Hardened steel retractable/lockable deburring blade - Works on 3mm-30mm tubing diameters
General Tools Standard Tubing Cutter/Deburrer
$18.50
- Classic design with anti-friction, flare groove rollers for precision cuts - Replaceable, hardened alloy-steel cutting wheel - Hardened steel retractable/lockable deburring blade - Works on 3mm-30mm tubing diameters (replacement cutting wheel available)
General Tools T-Handle Tapered Reamer
$28.00
- T-handle provides leverage for easier reaming - Made from hardened, tempered tool steel - Precision ground cutting edges for long life - Designed to ream diameters between 1/8" and 1/2"
General Tools Thread Repair File, Metric
$19.92
- 4-sided/8-pitch thread restoring file - High carbon steel construction - Restores thread alignment on external threads - For .75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, and 3.0 metric threads - Doubles as thread pitch gauge
FSA ISIS Bottom Bracket Tools
$35.99
- Fits over ISIS spindle end, extra deep for longer spindles - Compatible with internally splined bottom bracket cups (i.e. all Race Face ISIS, all FSA ISIS, most Shimano)
Atomlab Torque Nipple Tools
$3.90
- T-20 Torx L-wrench for pre-tensioning Torque nipples - 4.3mm wrench for tensioning Torque nipples via their wrench flats
IceToolz Cassette Removal Tools
$9.99
- Made of Cr-V steel - To be used with 1/2" driver
Hope Piston Bore-Cap Tools
$13.00
- Service tool for removing/Installing the torx-Shaped piston-Bore cap on hope mono-Series and moto monoblock calipers
General Tools Automatic Ball-Bearing Center Punch
$29.99
- Lightweight aluminum body with long lasting steel parts - Unique ball-bearing action for precise punch markings - 5" overall length, 5/8" body diameter, replaceable all-steel point (GT-0078) - Made in the USA
General Tools Drive-Pin Punch 8-Pc Set
$58.76
- Heat-treated tool steel with centerless-ground ends - 4" long with knurled bodies offer solid grip - First (4) have 3/4" drive length, last (4) have 1" drive length - Contains 8 individual punch sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", & 5/16", vinyl case
General Tools T-Handle Tap Wrench
$26.14
- Self-centering, hardened tool steel tap jaws - Knurled chuck sleeve for secure tool fitment - Sliding T-handle for tight spaces and extra leverage - Made in the USA
Evo Tool Box 36 Tools
$134.99
With Evo's Tool Box, they give you eighteen of the most commonly used tools in a hard case so you can travel with them and keep everything neatly in its place. You get two Philips screwdrivers, a slotted 5/7mm, Torx 15 and 20 wrenches, 8, 9 and 10mm sockets as well as a socket adapter. You also have an L-handle wrench, nylon tire levers, 2-in-1 crank tool, a chain tool, a hex set with 2, 2.5, 3, 4, 5, 6, 8 and 10mm hexes, a 15mm pedal wrench, a 24mm hex wrench, chain whip, 13-16mm cone wrenches, a headset wrench, a freewheel remover, two BB tools, a spoke wrench and a crank installation tool.
Park Tool Master Chain Tool
$63.95
Park's Master Chain Tool is designed specifically to work with the tight tolerances and narrow profiles of 10- and 11-speed chains and all high-quality derailleur chains. It's made of tool steel for excellent durability and uses an integrated link pocket to ensure precise alignment. It also features perfectly contoured, cushioned handles for comfort and ease of use. This pro-level chain tool includes a removable anvil to peen Campagnolo 11-speed chains. (The CT-4.3 is not compatible with Wipperman chains.)
Park Tool Valve Core Tool
$10.49
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
Topeak Hexus II
$27.95
Topeak's Hexus II is an ideal mini-tool for both mountain bikers and roadies. It features: 2, 2.5, 3, 4, 5, 6 and 8mm Allen wrenches; Phillips and regular screwdrivers; a Torx T25 for disc brakes; a chain hook; a universal chain tool and 14- and 15-gauge spoke wrenches. Packing more tools into its space saving design, the sides of the Hexus II are actually two removable tire levers.
Park Tool Cyclone Chain Scrubber
$25.95
Park's Cyclone Chain Scrubber is made of durable materials throughout and features an extra-large solvent reservoir, a series of rotating brushes, and a two-step cleaning process to get chains really clean without removal. There's even a strong magnet that draws metal particles scrubbed from the links to the bottom of the reservoir, preventing redistribution. And, the Cyclone's large handle makes it easy to hold and fill.
Park Tool I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool
$26.95
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.
Park Tool Professional Tool Kit
$769.95
An expanded and evolved set of our finest professional level shop tools that addresses the changing tool demands of modern bikes and their mechanics. The PK-3 includes over 70 of our best tools and was put together with versatility in mind. A great way to outfit a pro bench or to set up a fabulous home workshop, the PK-3 is an impressive set of tools that can help you perform hundreds of repairs and maintenance tasks. Kit Includes: ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm BBT-5/FR-11 Bottom Bracket/Cassette Lockring Tool for Campagnolo (12-tooth) BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive BCB-4.2 Bike Cleaning Brush Set BO-2 Bottle Opener CBW-1 Open End Wrench: 8/10mm CBW-4 Open End Wrench: 9/11mm CC-3.2 Chain Checker CCP-22 Crank Puller for Square Taper Cranks CCP-44 Crank Puller for Splined Cranks CM-5.2 Cyclone Chain Scrubber CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1 Chain Whip Pliers CT-3.2 Chain Tool DAG-2.2 Derailleur Hanger Alignment Gauge DCW-1 Double Ended Cone Wrench: 13/14mm DCW-2 Double Ended Cone Wrench: 15/16mm DCW-3 Double Ended Cone Wrench: 17/18mm DH-1 Dummy Hub DP-2 Threaded Dummy Pedal FR-5.2 Cassette Lockring Tool: Shimano, SRAM, Sun Race GP-2 Pre-Glued Super Patch Kit HCW-15 36mm/32mm Headset Wrench HMR-8 Shop Hammer HT-8 8mm Hex Tool MLP-1.2 Master Link Pliers NP-6 Needle Nose Pliers OBW-4 Offset Brake Wrench OM-1 Overhaul Mat PAW-12 12" Adjustable Wrench PH-1.2 P-Handle Hex Wrench Set PW-4 Professional Pedal Wrench RR-12 Tape Measure SBC-1 Spoke, Bearing and Cotter Gauge SCW-13 13mm Shop Cone Wrench SCW-14 14mm Shop Cone Wrench SCW-15 15mm Shop Cone Wrench SCW-16 16mm Shop Cone Wrench SCW-17 17mm Shop Cone Wrench SCW-18 18mm Shop Cone Wrench SCW-19 19mm Shop Cone Wrench SD-SET Shop Screwdrivers (Set of 4) SP-7 Side Cutter Pliers SW-0 Precision Spoke Wrench: .127" SW-1 Precision Spoke Wrench: .130" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TB-2 Emergency Tire Boots TL-1.2 Tire Lever Set TL-4.2 Tire Lever Set TWS-1 Torx Compatible Wrench Set
Lezyne CNC Chain Rod
$39.99
Lezyne's CNC Chain Rod is designed for heavy-duty use. Featuring a custom Lezyne chain that is easily replaced, this tool is built to get the job done every time. The handle is CNC-machined for strength and stylish good looks, and there's even an included lockring tool. Hang this beauty on your wall for all future cassette changes.
Giant Crank Bolt Wrench and Extractor
$13.00
For the home mechanic, Giant's Crank Wrench and Extractor is indispensable. This ingenious device is two tools in one with a socket for removing and installing most standard crank bolts and an extractor for removing most square-taper crankarms. Plus, the long, vinyl-coated handle provides the leverage needed to easily get the job done.
Crank Brothers m19
$25.49 - $33.99 $33.99 Up To 25% Savings
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
e*thirteen by The Hive Spider Removal Tool
$16.95
- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets
XLAB Gear Box Kit
$64.95
Convenient, state-of-the-art clincher repair kit with a stealth ‘carbon-look’ finish fits securely in cages for a reliable storage case. Rattle-proof padding for a noiseless ride. - Includes: XLAB Tri Tool Kit, 2 tire levers, (2) CO2s, Speed Chuck inflator and patch kit. Capacity: 25.8 in3 (423 cm3) - Height: 5.25 in (133.5 mm) - Weight: 447g (Gear Box Kit w/ full repair kit + spare tube), 65g (Gear Box empty)
Wolf Tooth Components Bottom Bracket/Centerlock Wrench
$32.95
- Lightweight 7075 aluminum wrench, ideal for long distance journeys - Fits CenterLock brake rotor lock rings and common external bottom bracket cups - Magnets in the hex end hold a stainless steel cassette lock ring socket, sold separately
Williams 3/8-inch Drivers
$21.88
- Spinner handle: bi-mold comfort grip handle and 9" length - Ratchet: 36t ratchet, quick release, finger fit handle and 7-3/4" length - Flex drive bar: swivel head and 10" finger fit handle - All drivers feature ball and spring socket retention
Williams 4-Piece Adjustable Wrench Set
$85.90
- Set includes 4 adjustable wrenches (6in., 8in., 10in. and 12in.) in a vinyl pouch - Measurement scale on head conveniently shows fastener size - Precision hardened and anti-corrosion treated
Williams Deadblow Hammer
$45.90 - $54.70
- Ergonomically Designed hard urethane construction with a non-marring non-sparking head and Hi-Vis yellow color - Deadblow feature minimizes bounce back and reduces hand fatigue
Williams Drive Adapters
$6.96 - $7.48
- Adapters for both 1/4" and 3/8" drivers and torque wrenches - Use secure ball and spring socket retention - Chrome plating provides increased protection from rust and corrosion
Williams Drive Extensions
$8.34 - $12.94
- All drive extensions fit 3/8" drivers - Use secure ball and spring socket retention - Chrome plating provides increased protection from rust and corrosion
Williams Reversible Ratcheting-Box/Open Wrench
$204.33
- Set includes 8-19mm wrenches - 12 point dual pawl ratchet for better contact - Ratchet lever on wrench is easily accessible for direction changes - Supertorque corners on open end provides extra turning power - High polished chrome finish is durable and cleans easily - Includes plastic storage tray
Wheelsmith Spoke Prep
$25.00 - $40.00
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
Wheels Manufacturing Inc. Bearing Press Speed Spacer
$7.50
Another must-have tool for the busy bike shop. Wheels Mfg. machined aluminum Speed Spacers take up extra space on your bearing press so you don't need to spin the handles as far to tighten things up. - Length: 30mm - OD: 22mm - ID: 10mm - Machined Aluminum - Anodized Red - Sold individually Compatible with: - PRESS-4 - Economy Press - PRESS-1 - Large Sealed Bearing Press - PRESS-1 - Handle & Rod Assembly
Wheels Manufacturing Inc. Bench Mount Axle/Cone Ruler
$65.00
- Anodized aluminum construction. Includes mounting hardware - Measures threads for all cones, locknuts and axles - Metric measurement on one side and Standard on the other side
Wheels Manufacturing Inc. Bottom Bracket Sealed Bearing Extractor Set
$99.00
- Bearing extractors set for pushing out 22mm, 24mm, and 30mm ID sealed bearings from bottom bracket cups. - Compatible with Wheels Mfg. 1/2" threaded rod press and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes (1) 30mm ID sealed bearing extractor (1) 24mm ID sealed bearing extractor (1) 22mm ID sealed bearing extractor (1) 52mm receiver cup (1) 44mm receiver cup sleeve (1) 42mm receiver cup sleeve (1) 39mm receiver cup sleeve (1) bearing pusher shaft
Wheels Manufacturing Inc. Bottom Bracket Sealed Bearing Installation Drift Set
$70.00
This 7-piece adapter set is used to install 22mm and larger inside diameter sealed bearings into bottom brackets. Includes adapters for the most common bottom bracket bearings for Shimano outboard cup BBs (HollowTech II), SRAM GXP, Truvativ, FSA, PF30 and BB30 bottom bracket bearings. - Includes open bore drifts for 6805, 24x37, BB30, PressFit30, GXP and BB86 bearings - 10mm ID hole, for use with Wheels Manufacturing bearing press handles - Compatible with Wheels Mfg. PRESS-1 or PRESS-4 handles
Wheels Manufacturing Inc. Bushing Removal Tool
$60.00
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
Wheels Manufacturing Inc. Double End BB Wrench
$22.00
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
Wheels Manufacturing Inc. Economy Bearing Press
$35.00
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors
Wheels Manufacturing Inc. GXP-LEFT Open Bore Adapter
$7.50
This Wheels Mfg. GXP-LEFT open bore adapter is used to press 22x37 sealed bearings in to SRAM GXP bottom bracket cups and direct fit frames like TREK BB90. The adapter is machined with one step at 22mm OD, which fits in to the center of the sealed bearing. - Installs: 22X37 (GXP) bearing - Inner Step Outer Diameter: 22mm - Outer Diameter: 37mm - Thru Hole Diameter: 0.387" (9.8mm) - Inner hole sized to fit 3/8" ACME threaded rod - Compatible with PRESS-1 or PRESS-4 handles - Machined, red anodized aluminum - Sold individually
Wheels Manufacturing Inc. Headset Cup Drift
$40.00
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
Wheels Manufacturing Inc. Headset Cup Press
$125.00
Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift is two-sided to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings. - Machined aluminum handles and drifts - Red anodized drifts and handles - Zinc-plated 1/2" diameter threaded rod - Long threaded rod works with long head tubes up to 250mm - Includes one Head Tube Drift - Includes one Headset Cup Drift - Laser etched for easy identification - Made in the USA
Wheels Manufacturing Inc. Headtube Drift
$40.00
Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm
Wheels Manufacturing Inc. Hub Bearing Installation Drift Set
$70.00
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
Wheels Manufacturing Inc. Nipple Threader
$40.00
Wheels Manufacturing Aero Rim Nipple Driver - Installs spoke nipples in hard-to-reach rims, like aero and deep profile designs - Speeds up wheel building and spoke replacements.
Wheels Manufacturing Inc. Open Bore Adapters
$7.50
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
Wheels Manufacturing Inc. Over Axle Adapter
$7.50
Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually
Wheels Manufacturing Inc. Over Axle Bearing Press Adapter Kit
$185.00
- Works in conjunction with Wheels Mfg sealed bearing press (BTI #WZ-9991) to install 10mm ID and larger bearings into hubs with shouldered axles, always pressing simultaneously on both the inner and outer race of the bearing and preventing damage during the installation process - Includes adapters for 12 different bearing sizes ranging from 10mm to 20mm: 6900,6000 (10mm ID); 6901,6001 (12mm ID); 6802,6902,6002 (15mm ID); 6803,6903,6003 (17mm ID); 6804,6904 (20mm ID) - Made in the USA
Page 1 of 21 Next page