Pumps/Inflation

Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Lezyne Pump Parts

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.

Head Washer for 2371 Head

The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

Replacement gasket for the SILCA HIRO Chuck

Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero

Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

- High effeciency design - Lightweight composite construction - Thumb lock release - Reversible Presta/Schrader with bracket

Portland Design Works' 16 ounce Co2 Cartridges are threaded, work with most Co2 inflators that require threaded cartridges, and are food-grade so they're completely gentle and safe for your valves and tubes.

The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

Refills … Get your refills here! - Threaded - 16 gram - 3 pack

Sunlite's Steel Frame Pump looks great on retro frames and modern road steeds alike. Its long steel barrel makes pumping up tires a breeze. And, it comes with mounting clips if your frame doesn't have a pump peg or your top tube isn't quite the right length.

This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass

Keep your Air Tool Pro floor pump working fantastic with this replacement head and hose.

A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.

90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

Replacement ABS Flip Thread Chuck for all Lezyne High-Pressure Floor Drive floor pumps and all Micro Floor Drive hand pumps.

- Replacement ABS Flex Hose for all Pocket Drive pumps - Presta & Schrader compatible

Threaded 16g CO2 cartridges for use with all Lezyne CO2 inflators. It inflates 700c road tire to 120psi (8.3bar) or one 26” MTB tire to 30psi (2.1bar). Sold in packs of five.

CNC machined aluminum dispenser with brass internals. Slip-on valve operation allows for quick inflation. Twin Slip-Fit head presses onto Presta or Schrader valves. Two-piece head allows for easy O-ring replacement. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges*. *CO2 cartridges sold separately.

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

This durable pump with SwitchHitter head automatically adjusts for Schrader or Presta valves. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps

- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible

Sunlite's Model D Floor Pump has a 16-inch tall steel barrel for easy inflation and a sturdy base. The easy-to-use thumblock head fits all of your Schrader valve tubes.

- Dual head mini road pump - Presta/Schrader compatible head - High pressure/high volume switch - Ergo fit T-handle - 120psi max

- Mini multisport pump perfect for taking along on the next adventure - Ball needle and inflator included - Presta/Schrader reversible head - 2-way pumping action - Twist lock valve connection - 80 psi max - Head Type: PV/SV

Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

It’s back, the Pro’s favorite! Perfect for Tubeless tires, valve extenders and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for any Presta application. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. Deep head adapts to a wide variety of applications including valve extenders. The head is now very easy to get on and off. This head is a MUST for Tubeless tire users. Allows high-flow inflation with the valve core removed for seating tires. PUSH on / PUSH off – the fastest way to get you going. Made with nickel-plated 6061-T6 alloy – Strong as Brass and only 1/3 the weight. It’s also compatible with Silca pumps and can be adapted to other pump brands with our optional Schrader barb or our floor pump replacement hose. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.

Quick-Clip design for frequent Schrader use. Prestacycle's oversized spring stands-up to high bicycle pressure for a good seal and safety. The compact angle head goes where even floor pump heads can’t reach, like kids bikes and small scooter tires! Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.

- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually

MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader. - Compact design for easy storage - Alloy construction for durability and lightweight - Press on for both Schrader and Presta valves - Compatible with all 3/8" threaded compressed air cartridges

A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged. - Compact, lightweight design fits in tight spaces - Press-on for both Presta and Schrader valves - Compatible with 3/8” threaded cartridges - Rotate CO2 cartridge to regulate inflation - Kit includes CNC-machined aluminum inflator head with a green finish for better visibility

The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!

Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 45 grams - Lifetime warranty

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

XLAB's Nanoflator CO2 inflator is small, light, easy to use, and built to last of light and durable aluminum. Simply thread on a CO2 cartridge (sold separately), press the Nanoflator on your valve, twist the black nozzle to inflate and you've got a full tire in seconds. Plus, the low-profile head works great on standard and disc wheels and fits all valve types.

CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves

Designed to provide you with a better sports’ bicycle experience the PRO Compact Minipump is intended to be carried with you on rides. Featuring a lightweight and compact structure and a telescopic design it has a resin barrel and is compatible with both Presta and Schrader valves. The Compact Minipump’s Magnet Lock system ensures its telescopic handle does not extend while riding, while the telescopic feature provides more volume per stroke than the standard PRO Compact Minipump. Compact minipump Designed to be carried with on rides Magnet Lock system Resin barrel Telescopic handle for added volume per stroke Lightweight and compact design Presta/Schrader compatible Maximum pressure:11 Bar/160 PSI

• Lightweight and compact mini pump • For both schrader and presta valves • Maximum pressure up to 11Bar / 160PSI • Magnet lock system • Glass fiber reinforced Nylon material • Colour: Black

Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).

Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.

The Fatty Object CO2 inflator fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. - Precision machined alloy parts - For use with both Presta and Schrader valves

Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 

Lezyne's lightweight, powerful Sport Drive HV mini-pump quickly inflates your mountain bike tires so you can get back ro pedaling. Its oversize aluminum barrel and no-slip Composite Matrix handle help you get pumped up to 90 psi in a flash. And making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.

Lezyne's easy-to-use Trigger Speed Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, it's press-on Presta compatible head is super fast to use and works with all threaded cartridges.

Angled Presta valve adapter - Designed for disc wheel use

Refills … get your refills here! - Threaded - 25 gram - 3-pack

The Airlift 200 is a single action bike pump that is compact enough to keep on hand anytime and anywhere. It has a large chamber to fill tires fast and a pump handle that locks in place for extra security. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Pump handle locks into place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure

n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.