Other

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes

Keep your handlebar organized and your devices secure with the SpaceMount Clamp from Minoura. - Single action multipurpose clamp fits almost anywhere on the bike - Small: red logo, 22mm–29mm clamp diameter - Medium: black logo, 28mm–35mm clamp diameter - Alloy body and stainless steel lever - Clamp body has one (1) M5 thread hole in center

- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be installed directly to bottle cage mounts on frame - Bottle cage and cartridges sold separately

The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be separated and installed directly to bottle cage mounts on frame - Includes seatpost adaptor and bottle cage bolts - Bottle cage and cartridges sold separately

- Stabilizes bike with double-leg stance - Fits most 26" and 700c bikes - Made of lightweight aluminum - Mounting plate included to fit a variety of bikes

Keep dust and water out of your headset with this easily attached wrap around neoprene cover.

The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches. All patch kits come with 2 large, 4 medium and 2 small patches. - 14 mils thick for premium durability - UV resistant – won’t fade or discolor

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork. - Fits Fork Stanchion size 32-36mm - Fits forks up to 180mm in travel - Weight: 31 grams (pair)

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 55mm wide x 269mm long - 14 mils thick polyurethane for durability - UV Resistant

Replacement part

- Accessory for the Shotgun 2.0 MTB seat - Allen key fixing for easy fitting, removal and adjustment - 250mm in length, with Pro 19mm rubber grips designed for little hands - Comes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Suitable for flat or riser style handlebars - Your child will love riding up front when they have their own handlebars and grips to hold onto

- Take the hassle out of the hill climbs – and enjoy bigger family rides together. - Designed for kids and kids at heart - Shock absorbing for a comfortable tow, without getting caught in the wheel - Attaches over the stem for quick use, or around the stem for longer climbs (carabiner included) - Also available is the Shotgun tow rope combo, which includes our hip pack for kids – the perfect place for storing the tow rope during family adventures.

Who knows more about dog attacks that the mailman? Letter carriers have had to deal with aggressive dogs since Claudius Polonius was delivering rolls of parchment to citizens of the Roman Empire. So what do the experts use to repel dog attacks? Well, the U.S. Postal Service has been using Halt! Since 1966. You might say they have been conducting field tests for over forty years. Halt! Products use Capsaicin, a naturally occurring extract of peppers, which, when sprayed in a dog's face, causes only temporary, but extreme discomfort for the dog. Think of it as attitude re-adjustment. Halt! Stops dogs in their tracks, giving you time to move out of danger. Halt's pressurized spray is accurate up to 10 feet.

Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"

Protect your frame from impacts, nicks, and scratches. - A clear self adhesive frame protector film (roll) - Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"

No graphics. No logos. Just a clean layer of protection, available in matte or gloss. Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

This sea gem shines on just about any color bike. Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Our Cheetah print is guaranteed to make you 20% faster and 100% feistier. The kit is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Universal kit designed to fit all bikes and sizes. Includes 6 easy-to-trim pieces for top tube, downtube, chainstays, and seat stays. - 10 mil guards protect frame from scratches, chips and shuttle/cable rub - Applying to road or gravel bike? Simply narrow pieces to desired width using scissors or exacto knife - An affordable way to customize your bike with rad designs - Made in the USA

A modern halftone camo pattern that looks great on dark and light bikes alike! Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Taste the rainbow, kids! Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Our Kashima gold Geo Deco design is subtly classy, just like you. Frame protection is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

- Rear, direct mounted kickstand with 18mm bolt spacing Mount: 18mm Direct Mount Length: 330mm Material: Alloy Color: Silver or Black

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

Giant's Mobility Kickstand attaches to your bike's frame at the rear dropout for convenience and easy access.

Replacement rear dropout kit Includes drive-side and non drive-side dropout Hardware included Fits: XtC Advanced 27.5+ (2017+) XtC Advanced 29er (2017+)

Features - E-Bike specific kickstand - Designed to handle the additional weight of battery assisted Giant bicycles - Adjustable leg assures the perfect fit for all frame sizes Fits: - Road-E - Quick-E - Dirt-E - ToughRoad GX-E - Explore-E - Vall-E - Amiti-E

Since the invention of the bicycle there’s been one constant…”How much does it weigh?” Whether it’s a wheelset, frameset, tool set, or whatever else riders get fixated on, weight matters. The Alpine Scale was the first Feedback Sports product and it was the first scale of it’s kind to be built (and patented) specifically to be clamped in a bike repair stand. With unmatched consistency and precision, ability to go quickly between pounds decimal, pounds and ounces, grams and kilograms with double the accuracy of our competitors, this is your hang scale of choice. - Easily clamped in a bike repair stand - Measures in precise 10g (0.02lb) increments - Easily swaps between pounds decimal, pounds and ounces, grams and kilograms - 8.5? (21.5cm) top nylon loop allows to hang from a hook, tree branch or by hand - Accuracy within ±10g (0.02lb) - 55lb (25kg) maximum load - Coated hook protects your frame or components - Zero and Tare functions for clearly and accurately identifying weight differences - Auto shut-off saves battery life - (4) AAA batteries included - 1-Year Warranty

- Axle mount - Made of tough steel construction

- Axle mount - Made of steel - Fits 16-inch wheel bikes

- Lightweight and durable alloy construction - Fully adjustable length from 24''-29'' - Allen bolt locking mechanism

- Center mount - Made of alloy with steel split rod extension - Adjustable with lockscrew - Fits bikes from 24-inch to 700C wheels

- Lightweight and durable alloy construction - Fully adjustable length from 24''-29'' - Allen bolt locking mechnism

- Stable 2-Stay mount - Made of alloy - Button type tool-free adjust - Fits wheels from 20-inches to 700C

- Sturdy 5mm steel plate construction - Provides stability for adult riders - Fits 20-inch to 26-inch wheel bikes - EN71 and EN14765 test approved - 6-inch steel wheels for increased stability - Weight Limit 220lb / 100 kg

Shelter protects from impacts – spreading their energy within its structure , is abrasion and solvent resistant, doesn’t yellow and has a semi-structural adhesion to the surface it’s applied onto: normal bicycle washing won’t affect it, but it can be removed – if needed – without damaging the underlying paint.. Sheet with pre-cut elements, to easily protect sensitive frame areas (chainstays, down tube, cable/frame contact points.

SHELTER protects from impacts* – spreading their energy within its structure -, is abrasion and solvent resistant, doesn’t yellow and has a semi-structural*** adhesion** to the surface it’s applied onto: normal bicycle washing won’t affect it, but it can be removed – if needed – without damaging the underlying paint.

Clear stick on chainstay and frame protectors.

The Dakine Aero Rack Pads are the answer to a more aerodynamic foam pad for your existing roof rack crossbars. For larger roof racks, like on a Hummer, we recommend the XL. The pads are the same size on both the Regular and XL but the Velcro sleeve is wider on the XL to accommodate thicker bars.

- Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Hand painted Japanese designs, Suzu spring-loaded lever arm strike - 55mm in diameter - Made in Japan

Built for Si dropouts. A durable kickstand for Cannondale Si dropouts that is stylish and smartly equipped. Where it thrives: Leisurely rides, in town What it's built for: Durability Highlights: - Stylish and sleek - Light and strong alloy construction - Flat/post brake mount compatible

Designed by Tullio Campagnolo, the BIG Corkscrew is a signature of artisanship of the Campagnolo brand and a masterpiece of functionality. 100% made in Italy by Italian craftsmen. Telescopic, self-centering bell perfectly positions the screw in the center of the cork - Screws harken back to seventies era Super Record cranks - Packaged in a collector's box - Two levers pull the cork out easily and delicately ensuring the bottle is not shaken, distubing sediment in aged wines - Designed so the screw will never completely twist through the cork, preventing pieces of cork dropping into the wine - Bronze is finished in a "vintage" hand-produced look. Satin is a great match for modern interior decor thanks to its sheen typical of steel

The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.

- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle

Bosch Nyon Retrofit Kit including holder, control unit and Handlebar shims

Intuvia E-Bike Head Unit - The Intuvia can charge devices such as a smartphone via the micro-USB port - Easy operation via the separate control unit - Bosch Drive Unit Compatibility: Active Line , Active Line Plus , Performance Line , Performance Line CX - Bosch Generation Compatibility: BDU2XX , BDU3XX

An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware