Taillights

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

Lights, camera, Electra. Light up your life and your bike. Increase safety while riding by strapping these lights to your bike. Brighten up your bike and guide your ride. - Easily attached and removed with rubber strap - Low power indication - Waterproof design - USB chargeable - Weight: 20g

Long running battery-powered rear light with high waterproof rating of IPX7. Built-in "Brake Mode" function will alert others behind you of your deceleration. - Built-in acceleration sensor for Kinetic mode (Brake mode) - Automatically turns on Hi for 2.5 sec when bike deceleration is detected - Waterproof IPX-7: Operates even after 30 minutes of submersion in a depth of 1 meter - Long runtimes - 360 degree visibility - 5 LEDs - 3 modes - Mode memory function - FlexTight SP-11 bracket (Ø12-32mm) - Snap System - Flashing Mode: 160 Hrs - Constant: 70 Hrs - Rapid Mode: 140 Hrs

- USB multi-purpose safety light can be used on clothes, helmets, or bikes - 360° bracket allows multiple mounting options for a variety of applications - 25 lumen output through 9 COB chip LEDs - 5 modes offer day and night uses - 4 to 6-hour runtime

A simple rear bike light for after dark. The Flare R Metro is a simple USB rechargeable rear bike light that can help cyclists be seen after dark. The versatile design and included bike mount make for easy, tool-free attachment to any bicycle. Remove the included mount to reveal a built-in clip that securely attaches to a rider's belt clip, pocket, or bag. Details: - A versatile USB rechargeable rear bike light designed to help riders stand out after dark. - 20 Lumens help make riders more visible after dark - Triple LED design can be seen from a wide visibility angle - Versatile design can be mounted on a bike, belt, or bag - Two steady modes and one flash mode - Low steady 8L-3 hrs, high steady 20L-1.5hrs, Flash 20L-6 hrs - Includes Flare R Metro, Clip Connect Mount, and Micro USB charging cable - Integrated clip for secure installation on belt or bag, simply remove the mount to access - Clip connect mount with 16-degree offset compensates for seatpost angle

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

The rebirth of an iconic bicycle light, the Frog Rear Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 20 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 60 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment

- 8 lumen safety tail light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

The Strip Drive Pro 400+ Rear is a cutting-edge rear light offering ten LEDs and a maximum output of 400 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Offering seven different output modes, including the highly disruptive Daytime Flash that grabs attention and the wide-angle optics providing an impressive 270° visibility range. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. A versatile mounting system attaches to aero or round seatposts, and the light also features USB-C waterproof charging(cable not included). Look no further, as this cycling tail light delivers unparalleled visibility-during the day or after dark. Note: This light is not being distributed within the German market. - Max 400 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Maximum side visibility design - Multiple mounting options with ladder strap - Lightweight and durable co-molded design - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

The Zecto Drive Max 400+ Rear is a high-visibility light that boasts an incredible 400 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 1300 mAh battery capacity, the Zecto Drive Max 400+ Rear offers a maximum runtime of up to 70 hours in Femto mode. It also boasts waterproof USB-C charging(cable not included), making it easy to keep it charged and ready to go. - Max 400 lumens / 70-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 1300 mAh battery capacity

Engineered for the ultimate road cyclist, the Hotrod™ 90 unleashes a powerful 90 lumens of flashing output for unprecedented night and day cycling safety. Its cluster mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Be seen all the time with 24/7 Safety Technology™, an exclusive set of solid and flashing modes to increase your safety when cycling, night and day. Every bit the road cyclist’s tail light, the Hotrod 90 uses a Versatite™ flexible mount compatible with most seat posts including aero styles. Performance - 90 lumen red tail light with 6 lighting modes engineered for use on roads and commuting - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable, internal battery lasts up to 100 hours - Water-resistant design - 1:30 ~ 100 hr run time - System weight: 35g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles *Features and specs are subject to change without notice.

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 12 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

Replacement LED assembly for the Centro LED helmet.

A compact and powerful USB rechargeable rear bike light that's daytime visible from up to 2km away. THE ULTIMATE DAYTIME RUNNING LIGHT The Trek Flare RT tail light is the ultimate daytime-visible rear bicycled light for road rides, daily commutes, and beyond. It features a bright, rechargeable light that can be seen from up to two kilometers away. An integrated light sensor auto-adjusts brightness based on your environment, making it easy to stay visible day or night. PRODUCT DETAILS - Specifically designed focus, flash, and range for ultimate daytime visibility - 90 Lumen interruptive flash pattern can be seen from up to 2km during the day - Integrated light sensor auto-adjusts brightness to your environment - Connect with compatible ANT+ devices for always-on, battery status, and wireless control - Flash modes: 90LM-6hrs, 45LM-12hrs, 5LM-15hrs Steady modes: 25LM-4.5hrs, 5LM-13.5hrs - Confidently ride through wet conditions with an updated USB port and IPX7 waterproof rating - Battery save mode provides 30 minutes of additional runtime when battery life reaches 5% - Includes Flare RT, rear Quick Connect bracket, and Micro USB charging cable

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

Be safe out there with Serfas' TL-STN Seat Stay Taillight. This water-resistant safety beacon will get you noticed out on the road with a large, super-bright 1/2-watt red LED flanked by 6 brilliant smaller LEDs. Plus, the weatherproof silicone body stretches to easily mount to any tube on your bike. Use a few Seat Stay Taillights for 360-degrees of visibility! This great light has steady, strobe and flash modes.

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 11 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

NiteRider Vmax+ 150 Taillight features 150 lumens in a low profile design with a full LED light panel. Low profile taillight design with a full LED light panel

Tuck's powerful red pulse beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Tuck features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6 to 18V on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike tail lighting solution. Key features: - 25 lumen taillight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee

- Dynamo operated - Compatible with 6V E-bike battery - Integrated reflector - Mounting distance 80 mm - Visible from the side - 40g

• 2 x 0.5 watt super bright red LEDs • Built-in Li-Ion rechargeable battery • 2 mode (steady / flashing) • 2 to 4.5 hour run time • Includes USB charging cable • Multi-fit QR seat post mount • Water resistant

• 5 LED rack mount rear light • 4 modes (1 steady 3 flashing) • Bolt-on mount for rear racks

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

- 5 super bright LEDs - Built-in Li-Ion rechargeable batteries with USB cable - 2.5 ~ 5 hours run time per charge - 3 modes (2 Steady, 1 Flashing) - Multi-fit silicone strap - Water-resistant silicone body - Rechargable: USB

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

- USB-rechargeable rear light with 42 COB LED chips - 7 different modes featuring two steady modes and 5 flashing settings - Innovative quick-release bracket can be attached to seat posts or helmets - Low-battery warning and integrated battery protection - Weighs only 26 grams

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 10 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours

ILLUMINATING THE FUTURE The Recon+ tail light can switch to a lower intensity light that avoids blinding fellow riders on the group ride. Features: - One super-powerful LEDs from world-famous manufacturer OSRAM - Two steady beam modes, three flash beam modes and - Group Ride beam mode with different level lumen output for variable use and run time - Pairs to activate Group Ride beam mode that switches to a lower intensity to avoid blinding fellow riders on the group ride - Compatible with ANT+ and Bluetooth devices - Easy-to-read LED power indicator on side displays the current power or recharge status (70~100% - Green; 30~70% - Orange; 0~30% - Red) - USB-C charging port - Rated IPX7 waterproof

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.

Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

The Zecto Drive 200+ Rear is a low-profile, high-visibility light with an impressive 200 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 200+ Rear offers a maximum runtime of up to 35 hours in Femto mode. It also boasts USB-C waterproof charging(cable not included), making it easy to keep it charged and ready to go. - Max 200 lumens / 35-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity

Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)

The E-Bike Rack Pro StVZO E40 rear light is StVZO-certified and features 360° visibility Vivid Optics which floods bikes' surrounding area with light for improved rider visibility. Twelve high-output LEDs provide 40 lumens. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It includes 50 and 80mm rack mount spacing, Stainless Allen key hardware and an integrated 135 cm power cable connecting to the e-bike's motor/battery system. E-Bike compatibility: 10.5 – 13.5V input, 1.7W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - 40 lumens - Rear Rack mounting for optimum visibility - StVZO-optimized lens with twelve high output LEDs - 360° visibility Vivid Optics floods bikes' surrounding area with light for improved rider visibility - E-bike Compatible 10.5—13.5V input, 1.7W - Rigorously tested to IPX7 Waterproofing standards - 50 and 80mm rack mount spacing - Stainless Allen key hardware resists corrosion - 135cm power cable included

Made for the ultimate road cyclist, the HotrodTM 120 taillight unleashes a powerful 120 lumens of flashing output for unprecedented night and day cycling safety. High-intensity cluster-mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Using Cygolite’s 24/7 Safety Technology® with exclusive solid and flashing modes to increase your safety, the new Hotrod Rear 120 includes new Bzzz Flash mode to stand out even more both day and night. Every bit the road cyclist's tail light, the Hotrod 120 uses a VersatiteTM flexible mount that conveniently attaches to most seat posts including aero styles. Performance - 120 lumen red tail light with 7 lighting modes engineered for road cyclists - Continuous array of LEDs work in unison to shine an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable with 1:15 to 70 hours of run time, and 3 hour recharge time. Technology and Safety - Built-in 24/7 Safety Technology® gives you a powerful selection of 7 night and day modes (DayLightning® High Flash, High Steady, Group Low Steady, SteadyPulse®, Zoom, Bzzz Flash, Low Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Zoom mode signals those around you with a gentle change in brightness - All-new on Hotrod, Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Low battery indicator alerts you when a charge is needed - Light mode memory saves the mode you're in before the light is turned off - VersatiteTM flexible mount conveniently attaches to seat posts including aerobars - Designed, engineered, and assembled in the USA RUN TIMES: - Group (low steady): 70 hr - High Steady: 1:15 hr - Zoom: 5 hr - SteadyPulse®: 5:30 hr - Low Flash: 30 hr - Bzzz Flash: 8 hr - DayLightning® Flash: 3 hr CHARGE TIME: - 3 hrs (depending on the charger used) MOUNTING: - Flexible seat post mount BATTERY: - Built-in Li-Ion SYSTEM WEIGHT: - 35g *Features and specs are subject to change without notice.

Topeak's RedLite Aura gives you 1 high-flux piranha LED and 2 super-bright red LEDs to provide superb visibility for cars approaching from the rear. It mounts quickly and easily to Topeak racks and seatposts, and the included coin batteries deliver up to 120 hours of run time.

- Flat COB chip rear LED light with 38 individual COB chips - USB rechargeable 300 mAh li-ion polymer battery - 7 modes including a high and low setting and 5 flashing settings - Daytime flash modes enhances safety in any conditions or time of day - Low battery warning and battery capacity indicator (double click button to check) - Mode memory and tool free installation - Mount: seatpost - Lumens: 20

- ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILTY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option - .20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs

Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.

- COB style LED rear safety light in the shape of a heart - Perfect for cruisers, kids bikes or anyone that is feeling the love and desires a little extra flair on their ride - USB rechargeable with integrated low battery indicator Modes: 5 Mount: Rubber Strap Rechargable: USB Lumens: 15 Lumen Range: 1-100

- Dynamo operated - Compatible with 6V E-bike battery - Integrated reflector - Mounting distance 50 mm - Visible from the side - 40g

Original equipment replacement light. The right parts for the right bike. PRODUCT DETAILS - Light has turn signal and brake light function - Intended to be used on Electra Ponto Go! - 6-12V - IPX5 waterproof rating

Experience the next level of cycling safety with the Strip Drive 300+ Rear light. This exceptional rear light offers ten LEDs and a maximum output of 300 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. With seven output modes, including highly disruptive Daytime Flash modes, wide-angle optics providing 270° visibility, USB-C waterproof charging(cable not included), and a lightweight yet durable co-molded design, it's the ultimate choice for every cyclist. A versatile mounting system attaches to aero or round seatposts and recharges via a waterproof USB-C connection. - Max 300 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Lightweight and durable co-molded design - Maximum side visibility design - Multiple mounting options with ladder strap - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity

• 2 x 0.5 watt super bright red LEDs • 3 modes (1 steady 2 flashing) • Multifit bracket (25-32mm)

- USB rechargeable 3 lumen safety light - 4 modes including 1 solid and 3 flashing settings - Multi-fit rubber strap attachment - Charging cable included

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 7.5 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

Vmax+ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more! For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. - 6 Modes with Run Times: 4:30-25:30h - Lumen Output: 150 - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in last mode used)

The most powerful line of single LED tail lights just got even brighter. Sporting an aggressive design and powerful output, the Hotshot Pro™ 200 is engineered from the ground up to stand out in the brightest of daytime and at night with intense 200 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. It even senses day and night, automatically adjusting the brightness of the flashing modes. Every bit the road cyclist’s tail light, its extra-wide beam lens maximizes your presence from afar, and its new low-profile flexible mount makes it easy to use on standard and aero seat posts. Get the most out of your ride with up to 210 hours of run time. (patent pending) - Powerful and efficient single LED blasts 200 lumen flashes (120 lm steady) - Engineered to make you stand out in broad daylight and at night - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the flash tempo of the flashing modes and the brightness of Steady mode with the simple 2 button interface (patent pending) - All flashing modes feature Adaptive Flash™ that sense day and night, automatically adjusting to the optimal brightness - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - Enhanced Cycling Optics™ expands your presence with an extra-wide and long-range beam - USB rechargeable - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 54 grams - Flexible seat post mount fits most standard and aero seat posts - 2 ~ 210 hours of run time Patent pending. *Features and specs are subject to change without notice.

Get that roadster night-ready with this fender-mounted taillight. Designed to fit perfectly on any of our Pure City fenders, so you can boost your visibility without cluttering up your ride. - Fits any Pure City Step Through or Classic - 2x AA batteries not included - The integrated cage is both visually pleasing and functional as it protects the light should your ride fall over - 5mm LED with built in reflector housing pulls double duty to help keep you seen and safe

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries