Taillights

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

Be safe out there with Serfas' TL-STN Seat Stay Taillight. This water-resistant safety beacon will get you noticed out on the road with a large, super-bright 1/2-watt red LED flanked by 6 brilliant smaller LEDs. Plus, the weatherproof silicone body stretches to easily mount to any tube on your bike. Use a few Seat Stay Taillights for 360-degrees of visibility! This great light has steady, strobe and flash modes.

Long running battery-powered rear light with high waterproof rating of IPX7. Built-in "Brake Mode" function will alert others behind you of your deceleration. - Built-in acceleration sensor for Kinetic mode (Brake mode) - Automatically turns on Hi for 2.5 sec when bike deceleration is detected - Waterproof IPX-7: Operates even after 30 minutes of submersion in a depth of 1 meter - Long runtimes - 360 degree visibility - 5 LEDs - 3 modes - Mode memory function - FlexTight SP-11 bracket (Ø12-32mm) - Snap System - Flashing Mode: 160 Hrs - Constant: 70 Hrs - Rapid Mode: 140 Hrs

The Zecto Drive Max 400+ Rear is a high-visibility light that boasts an incredible 400 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 1300 mAh battery capacity, the Zecto Drive Max 400+ Rear offers a maximum runtime of up to 70 hours in Femto mode. It also boasts waterproof USB-C charging(cable not included), making it easy to keep it charged and ready to go. - Max 400 lumens / 70-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 1300 mAh battery capacity

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

- USB multi-purpose safety light can be used on clothes, helmets, or bikes - 360° bracket allows multiple mounting options for a variety of applications - 25 lumen output through 9 COB chip LEDs - 5 modes offer day and night uses - 4 to 6-hour runtime

A compact and powerful USB rechargeable rear bike light that's daytime visible from up to 2km away. THE ULTIMATE DAYTIME RUNNING LIGHT The Trek Flare RT tail light is the ultimate daytime-visible rear bicycled light for road rides, daily commutes, and beyond. It features a bright, rechargeable light that can be seen from up to two kilometers away. An integrated light sensor auto-adjusts brightness based on your environment, making it easy to stay visible day or night. PRODUCT DETAILS - Specifically designed focus, flash, and range for ultimate daytime visibility - 90 Lumen interruptive flash pattern can be seen from up to 2km during the day - Integrated light sensor auto-adjusts brightness to your environment - Connect with compatible ANT+ devices for always-on, battery status, and wireless control - Flash modes: 90LM-6hrs, 45LM-12hrs, 5LM-15hrs Steady modes: 25LM-4.5hrs, 5LM-13.5hrs - Confidently ride through wet conditions with an updated USB port and IPX7 waterproof rating - Battery save mode provides 30 minutes of additional runtime when battery life reaches 5% - Includes Flare RT, rear Quick Connect bracket, and Micro USB charging cable

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

Streamline your bike setup and optimize the height of your compatible Varia rearview radar to help make you more visible to approaching motorists. This optional mount kit allows cyclists to mount and install their compatible Varia device beneath their bicycle saddle on standard alloy seat rails (7mm round). Installation is simple with a 4 mm hex wrench (not included). - Seat rail clamp - Friction flange mount extender - Quarter-turn adapter - Lever-lock adapter - Two M4 bolts

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

The rebirth of an iconic bicycle light, the Frog Rear Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 20 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 60 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

Engineered for the ultimate road cyclist, the Hotrod™ 90 unleashes a powerful 90 lumens of flashing output for unprecedented night and day cycling safety. Its cluster mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Be seen all the time with 24/7 Safety Technology™, an exclusive set of solid and flashing modes to increase your safety when cycling, night and day. Every bit the road cyclist’s tail light, the Hotrod 90 uses a Versatite™ flexible mount compatible with most seat posts including aero styles. Performance - 90 lumen red tail light with 6 lighting modes engineered for use on roads and commuting - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable, internal battery lasts up to 100 hours - Water-resistant design - 1:30 ~ 100 hr run time - System weight: 35g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles *Features and specs are subject to change without notice.

Replacement LED assembly for the Centro LED helmet.

- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment

- 8 lumen safety tail light - Built in Li-Ion USB rechargable battery - 3 modes - 2 steady and 1 flashing setting - Multi fit rubber strap attachment - Low battery indicator

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

- 3 pcs Directions COB LED - Max. Lumens: 150LM (FL-1 tested) - Max.Runtime: 140 hrs (FL-1 tested) - Battery Type : LI-PO - Recharge Time: 2hrs - Weight: 35g - Size L: 2.5" W: 0.75" H: 1"

- USB-rechargeable rear light with 42 COB LED chips - 7 different modes featuring two steady modes and 5 flashing settings - Innovative quick-release bracket can be attached to seat posts or helmets - Low-battery warning and integrated battery protection - Weighs only 26 grams

USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

- 5 super bright LEDs - Built-in Li-Ion rechargeable batteries with USB cable - 2.5 ~ 5 hours run time per charge - 3 modes (2 Steady, 1 Flashing) - Multi-fit silicone strap - Water-resistant silicone body - Rechargable: USB