Lighting

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

Mid Cobber Twinpack Front and Rear lights produce an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, these bike lights are brilliantly effective at attracting attention and helping keep you safe on the road. Packing 320 lumens for the front and 170 lumens for the rear, the Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best front and rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

- 350 lumen XM-L LED - Built-in Li-Ion USB rechargeable battery - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit QR handlebar bracket - 2.2 ~ 6 hour run time per charge

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

- High power 100 lux LED light, more than 50,000 hours life span - Dynamo operated - Double-Lens-Tech for perfect light distribution and high efficiancy - Visible from the side - Retro reflector can be mounted optionally - 70g

Engineered to stand out day and night, the Hotshot SL™ 50 delivers nearly twice the output of the original Hotshot™ with powerful 50 lumen flashes. Exclusive 2 button design lets you fully adjust the tempo of each flash mode to maximize motorist awareness. Every bit the road cyclist’s tail light, its power combines with an impressive 200 hours of run time to give you a large presence anytime and anywhere. (patent pending) - Powerful 50 lumens flashing - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface (patent pending) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 55 grams - Seat post mount included - 2:30 ~ 200 hr run time Patent pending. *Features and specs are subject to change without notice.

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

- High power 20 lux LED light, more than 50,000 hours life span - Integrated retro reflector to be better seen by oncoming traffic - Compatible with 6-12V E-bike battery - Optimal light distribution by our double lens technology - Clear lens technology, you are also visible from the side - Compact, sportive design - 80g

AMPP400 Safety first, the AMPP 400 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. Viz 150—Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. - Rechargeable headlight (400 lm) - Wide beam with OptiCube lens technology - Excellent side visibility - Low battery indicator (Illuminates in red with less than 20% battery remaining) - USB rechargeable (Micro-USB cable included) - Mode memory function - Four light modes (High / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket - Improved release button has made it easy to remove the light unit from the bracket - Helmet mount and center fork bracket (optional) Run Times - High (400 lm): 2 hours - Low (200 lm): 4 hours - Daytime Hyper-Constant (400/200 lm): 6 hours - Flashing (200 lm): 60 hours ViZ150 Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. Run Times - Constant (20 lm): 5 hours - Flashing (15 lm): 70 hours - Group Ride (50 lm): 11 hours - Daytime Hyperflash (150 lm): 15 hours

Engineered for the ultimate road cyclist, the Hotrod™ 90 unleashes a powerful 90 lumens of flashing output for unprecedented night and day cycling safety. Its cluster mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Be seen all the time with 24/7 Safety Technology™, an exclusive set of solid and flashing modes to increase your safety when cycling, night and day. Every bit the road cyclist’s tail light, the Hotrod 90 uses a Versatite™ flexible mount compatible with most seat posts including aero styles. Performance - 90 lumen red tail light with 6 lighting modes engineered for use on roads and commuting - Continuous array of LEDs work in unison to illuminate an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable, internal battery lasts up to 100 hours - Water-resistant design - 1:30 ~ 100 hr run time - System weight: 35g Technology and Safety - 6 modes: High Flash - SteadyPulse® - Zoom - Group - Low Flash - High Steady - SteadyPulse's steady beam helps motorists better gauge their distance from you while the overlapping pulses keep them alert of your presence - Sturdy and flexible Versatite™ mount attaches to most seat posts and seat stays, including aero styles *Features and specs are subject to change without notice.

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

The Lars Rover 810 is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance for up to 10 hours of ride time. The Lars Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. The rugged alloy construction is weatherproof and strong enough to handle the abuse of an urban commute. - 5 Modes: Steady low (6 hours), Steady medium (3 hours), Steady high (1.5 hours), Fast Flashing (20 hours), Pulse (7 hours) - Li-ion battery, CREE LED, Texas Instruments integrated circuit - Weatherproof exterior for all-season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - Includes UV-proof quick on/off handlebar mount

- 300 lumen, compact handlebar mounted headlight - Rechargeable 2600 mAh battery with included charging cable - 5 modes including 4 steady brightness levels and flashing mode - Integrated silicone rubber strap mount is compatible with bars from 25.4 - 31.8mm - Low battery indicator

Lezyne Ebike Classic Stvzo E500 Headlight; An advanced StVZO certified e-bike cycling headlight. This light is housed in a high-quality machined aluminum body with computerized thermal management to maximize lumen output efficiency. Running on cutting-edge programming, this light offers up to an impressive 500 lumens of output. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w. Download the manual below for further installation and compatibility. - 500 lumen - STVZO optimized lens - 130cm cable - Forward center mount and hardware

The Lezyne STVZO Pro E115 Headlight has a German StVZO optimized lens with approved flood and long-range beam. High performance always-on LED delivers 310 lumens. Durable, heat-dissipating CNC machined aluminum construction. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. - Direct X-Lock and CNC aluminum fork mount - Includes 140cm long power cable

The Zecto Drive Max 400+ Rear is a high-visibility light that boasts an incredible 400 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 1300 mAh battery capacity, the Zecto Drive Max 400+ Rear offers a maximum runtime of up to 70 hours in Femto mode. It also boasts waterproof USB-C charging(cable not included), making it easy to keep it charged and ready to go. - Max 400 lumens / 70-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 1300 mAh battery capacity

FRONT LIGHT: A compact cycling safety light built around three high-output LED emitters, the KTV Drive Pro 300+ Front light offers up to 300 lumens of output and a highly disruptive Daytime Flash mode. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. The KTV Drive Pro 300+ Front offers convenience and versatility with six output modes, up to an impressive 100-hour max runtime, and waterproof USB-C charging(cable not included). REAR LIGHT: The KTV Drive Pro+ Rear is a compact, aero seatpost compatible rear bike light providing up to 150 lumens and six output modes. It offers up to 20 hours of max runtime and a highly disruptive Daytime Flash mode. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, durable, rigorously tested to IPX7 Waterproofing standards, and an integrated USB stick allows convenient cable-free recharging. Note: These lights are not being distributed within the German market. - Front Light Max 300 lumen blast mode / 100-hour runtime in Femto mode - Front Light Max 300 lumen blast mode / 100-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - Low-profile mounting with integrated strap hooks - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity - Rear Light Max 150 lumens / 20-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

Highly advanced StvZO-certified e-bike cycling front light delivering 550 lumens of output. The E-Bike Fusion StVZO E550 is housed in a CNC-Machined and Bead-Blasted Aluminum body with extruded cooling fins ensuring durability, efficient heat dissipation, and an advanced computerized thermal management chip to maximize lumen output efficiency. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. It has an integrated 130 cm (51.2 inches) cable connecting to the e-bike's motor/battery system. The BES3 BOSCH connector and our e-bike center mount are included. E-Bike compatibility: 10.5 – 13.5V input, Max 9W. Our e-bike lights are powered by the motor/battery of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model, battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you.

The rebirth of an iconic bicycle light, the Frog Front Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 40 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 80 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

The rebirth of an iconic bicycle light, the Frog Rear Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 20 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 60 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

Support Cells extend the burn time on your Exposure lights through Smart Port Technology. - Cell comes with a Support Cell Connector which allows you to charge the battery from your Smart Charger - Cable Length: 30cm (Can be extended with our 65cm extension cable) - Weight: 75g

AC adapter for NiteRider Pro 2200 Race, Pro 1800 Race, Pro 1200 Race, MiNewt Pro 770 Enduro, MiNewt Pro 750, TriNewt, TriNewt Wireless and all MiNewt Series bike lighting systems. Please note: Style and color may vary SYSTEM COMPATIBILITY - Pro 2200 Race - Pro 1800 Race - Pro 1400 Race - Pro 1200 Race - MiNewt Pro 770 Enduro - MiNewt Pro 750 - TriNewt - TriNewt Wireless - MiNewt Series

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours